Apex Controller

These grounding probes come with a non-corrosive titanium rod attached to a 10ft stainless wire lead, a three prong grounded plug, with an additional grounding eyelet. These probes also utilize an insulated transition joint, insuring against corrosion...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

The perfect solution to help organize and control the rat's nest of wires that most aquariums suffer from.  This board was created to easily allow you to mount an apex, power strips, equipment controllers and much more so they are easily accessed an...

The Energy Bars available for our Apex systems are much more than a glorified power strip. In fact, this component of your aquarium controller equipment is far more important than most people realize – and not all systems are created equal! It...

Skimmer Security Made Simple Smart Skimmer Security by AutoAqua uses the uniquely-designed contactless optical sensor to prevent the protein skimmer from overflows. No moving parts to service or fail. Magnetically coupled sensor makes it super...

Moonlight in the ocean is believed to be as significant as the time spent in full daylight. Moonlight triggers various internal and external biological activities among the many thousands of reef organisms. Moonlight LEDs for your aquarium emulate that...

This attractive fluid containment system stores your dosing fluids in style and even tells you when it’s time to refill! Each side stores two liters (2L) of fluid Connects directly to your DŌS Optical sensors inform your APEX when...

Usually used with aquarium accessories like reactors, carbon/GFO filters, etc., this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor...

Usually used with aquarium accessories like RODI inputs, calcium reactor feed lines etc., this flow sensor can be placed in line with the flow on 1/4″ tubing, connected to the FMM, and communicate to your Apex the flow rate of water...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second...

Bring the award-winning pumps and lights from EcoTech Marine and AquaIllumination wirelessly under the control of the easy to use, yet powerful, Neptune Systems’ Apex and Apex Fusion interface. Scheduled Feeding With the Apex, you can...

Every day it seems there is yet another LED light fixture released. Each one with its own method for control and dimming. With this module, you can outfit your Apex System with the ability to control many different brands of LED lights…from...

Features and Benefits: Performs continuous light-level monitoring for your aquarium Measures actual PAR – the light corals and plants use Prevents burning out corals Includes ASM – the new Advanced Sensors Module PAR sensor hides...

1LINK is the marrying of the Aquabus communication standard, along with the power wires to drive higher power devices, all in one single cable.  One of the benefits of this is to avoid the need for a DC power brick for every 24V device in your...

Plug this probe into your FMM and then place it underneath your carpet near your aquarium. Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take place. Don’t have carpet, see the next...

This kit was created to be used in conjunction with Neptune Systems salinity/conductivity probe.  It allows the probe to stay clean and fixes a well know issue with the salinity probe.  Microbubbles no more.  Kit Includes: Salinity...

Key New Features in our A3 Series: The A3 Pro will include all new, industry-first, Liquid Level Sensor (LLS) which will have the ability to measure and monitor the depth of water and a new optical multi-surface leak detection probe that works on any...

Peace at Mind Made Simple Featuring a Plug and Play design, Smart Level Security automatically detects the water level status when mounted. Magnetically-coupled sensor makes it easy to adjust to the desired level to secure your aquarium...

1LINK™ – Easy, one-click installation The WAV is the first of a line of aquarium products from Neptune Systems that will use a completely new interface. While many in the aquarium world continue to embrace wireless technologies for...

Adaptive Reef in conjunction with Harry's Aquatics is pleased to bring a full line of products designed to work with and enhance the user experience with aquarium controllers. From switch control boxes and 0-10v based devices to warning lights and...

The perfect solution to help organize and control the rat's nest of wires that most aquariums suffer from.  This board was created to easily allow you to mount an apex, power strips, equipment controllers and much more so they are easily accessed an...

AQUABUS EXTENSION CABLE (M/F)-VARIOUS LENGTHS The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to extend a M/M Aquabus Cable. Remember,...

The WAV moves water. Plain and simple. More than 4000 gallons per hour of it! Better yet, for the same amount of flow, the WAV is smaller, uses less power, and is quieter than the most popular powerhead pumps on the market. A powerhead that answers...

Key New Features in our A3 Series: The A3 Apex will include a new Magnetic Optical Sensor that is designed to better prevent water incursion and includes our classic Solid Surface Leak Detector (LD-2). The most successful aquariums are those...

Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor itself uses British Standard Parallel Pipe...

The A3 Jr is a Monitoring Only solution.  You can not turn anything on or off with it straight out of the box.  It becomes a full controller however as soon as you add a Powerbar.  To make it a full controller just buy an Energy Bar...

Mount your Vortech Pump Controller in style.

This kit was created to be used in conjunction with Neptune Systems salinity/conductivity probe.  It allows the probe to stay clean and fixes a well know issue with the salinity probe.  Microbubbles no more.  Kit Includes: Salinity...

This wall mount allows you to easily mount your aquarium controller board to a wall. Dimensions: 11"L x 1.125"W x 2.5"H

Some of the most successful reef aquariums employ the use of a macroalgae-filled growth area or refugium for the purpose of nutrient control. The GRO is a specialized, 20W LED light designed to grow many types of common macroalgaes (i.e. Chaetomorpha)...

This Package Includes: 1x - Full Apex A3 PRO WIFI Controller System 1x - Apex TRIDENT - Automatic Water Tester w/2 Month Reagents & Calibration Fluids 1x - Neptune DOS Dosing Pump The New Apex System includes probes for Temperature, pH, and...

Smart AC Socket is a simple accessory from AutoAqua that allows the use to swap out the small DC pump on a Smart ATO, Smart ATO Micro or AWC to any AC pump under 9amps power draw.

Mount your Vortech Pump Controller in style.

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

The Coralife Digital Power Center features a digital LCD display and a seven time cycle setting alternating timer for creating a variety of day / night scenarios. The Digital Power Center includes a total of 8 outlets with two outlets dedicated to...

Moonlight in the ocean is believed to be as significant as the time spent in full daylight. Moonlight triggers various internal and external biological activities among the many thousands of reef organisms. Many corals continue to grow under moonlight...

This kit was created to be used in conjunction with Neptune Systems salinity/conductivity probe.  It allows the probe to stay clean and fixes a well know issue with the salinity probe.  Microbubbles no more.  Kit Includes: Salinity...

AQUABUS EXTENSION CABLE (M/F)-VARIOUS LENGTHS The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to extend a M/M Aquabus Cable. Remember,...

Designed with hobbyist needs in mind, Red Sea’s new slide-out Control Panel helps you to get the most out of your cabinet space by placing your dosers, controllers and other devices in one easily accessible place. The Control Panel is designed to...