Apex Controller

Faceplates provide for a cleaner more flush installation to give your cabinet a higher-end, more custom look. They fit a wide variety of aquarium controllers, pump controllers, and auto top-off (ATO) controllers. Some popular examples...

The Neptune Systems DŌS Dosing and Fluid Metering System is a popular automatic dosing system that is a perfect fit for the Controller Cabinet when combined with the DŌS faceplate. You’ll be able to hide the unit inside the stand for a cleaner...

Trident faceplates provide for a cleaner more flush installation to give your cabinet a higher-end, more custom look. They fit a wide variety of aquarium controllers, pump controllers, and auto top-off (ATO) controllers. Some popular examples...

Trident faceplates provide for a cleaner more flush installation to give your cabinet a higher-end, more custom look. They fit a wide variety of aquarium controllers, pump controllers, and auto top-off (ATO) controllers. Some popular examples...

The Neptune Systems DŌS Dosing and Fluid Metering System is a popular automatic dosing system that is a perfect fit for the Controller Cabinet when combined with the DŌS faceplate. You’ll be able to hide the unit inside the stand for a cleaner...

Adaptive Reef Controller Cabinet Recessed Faceplate - Double Slat - Recessed faceplates provide for a cleaner more flush installation to give your cabinet a higher-end, more custom look. They fit a wide variety of aquarium controllers, pump...

PLEASE ONLY PURCHASE 1x Two Month Supply.  We will not be able to restock any reagents for the next 30 days. 2-month reagent kit (based on the default testing schedule of 4-Alk/2-Ca/2-Mg per day).  The reagent kit has at least 240...

This kit was created to be used in conjunction with Neptune Systems salinity/conductivity probe.  It allows the probe to stay clean and fixes a well know issue with the salinity probe.  Microbubbles no more.  Kit Includes: Salinity...

The 4″ LLS is the smallest of the four sensor offerings.  It is the perfect fit for small reservoirs for small sumps, ATO reservoirs and additive containers.  This can be a great solution to double check that liquid additions of your...

The PMUP is a multi-purpose pump that can be used for many different tasks on your aquarium. Automatic Top-Off (ATO) Carbon reactors GFO reactors Biopellet reactors Many other salt or freshwater uses NEW IN VERSION 2: Automatic shut off when...

Moonlight in the ocean is believed to be as significant as the time spent in full daylight. Moonlight triggers various internal and external biological activities among the many thousands of reef organisms. Many corals continue to grow under moonlight...

Connect external switches and I/O Inputs to your Apex When connected to the I/O Port of your Apex, Apex Lite, or PMx module, the Breakout Box gives you an easy way to connect up to six external switch inputs to your Apex. Examples of things you might...

Neptune Systems Magnetic Probe Rack Features – MPR: Organizes up to four probes. Designed specifically for the Apex Controller probes, a perfect fit for the thicker temp probes. Built with an all acrylic weather and shatter resistant design...

New to the leak detector offerings is the Optical Multi Surface Leak Sensor (LD-3).  This is a weighted sensor that is an improved sensor and design over our Solid-Surface Leak Sensor (LD-2).  Those improvements include: An epoxied design...

The Magnetic Optical Sensor replaces our optical sensor with magnet and offers an improved look, feel, and magnetic design that also lends itself to help prevent water incursion into the sensor. This sensor plugs into your FMM and, using reflected...

The Coralife Digital Power Center features a digital LCD display and a seven time cycle setting alternating timer for creating a variety of day / night scenarios. The Digital Power Center includes a total of 8 outlets with two outlets dedicated to...

AQUABUS EXTENSION CABLE (M/F)-VARIOUS LENGTHS The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to extend a M/M Aquabus Cable. Remember,...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

This is a power supply for the Neptune Systems FMM, DOS, ATK and Trident.

This 24VDC powered, normally-closed (NC), solenoid valve has push-fit tubing input and outputs designed for standard 1/4″ tubing. The electrical connection on this solenoid valve fits the DC24 accessory ports found on the FMM, 1Link, and Energy Bar...

Plug this probe into your FMM and then place it on any surface where you want to detect stray water. Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take place.  Time is so critical when it...

Plug this probe into your FMM and then place it underneath your carpet near your aquarium. Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take place. Don’t have carpet, see the next...

Usually used with aquarium accessories like reactors, carbon/GFO filters, etc., this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor...

Moonlight in the ocean is believed to be as significant as the time spent in full daylight. Moonlight triggers various internal and external biological activities among the many thousands of reef organisms. Many corals continue to grow under moonlight...

Replace your Temperature Probe, add one for another tank, or put one on your PM2/PM3 module for temperature compensated readings. Buy this probe if you are: Replacing an old probe. Adding another tank to your system via a PM1. Want to have more...

Smart AC Socket is a simple accessory from AutoAqua that allows the use to swap out the small DC pump on a Smart ATO, Smart ATO Micro or AWC to any AC pump under 9amps power draw.

This sensor plugs into your FMM and, using reflected infrared light, will signal your Apex when it changes state from being wet to dry or dry to wet. This sensor can be used for constructing your own ATO (auto-top-off), as a high-level warning sensor in...

This wall mount allows you to easily mount your aquarium controller board to a wall. Dimensions: 11"L x 1.125"W x 2.5"H

This wall mount allows you to easily mount your aquarium controller board to a wall. Dimensions: 11"L x 1.125"W x 2.5"H

This kit was created to be used in conjunction with Neptune Systems salinity/conductivity probe.  It allows the probe to stay clean and fixes a well know issue with the salinity probe.  Microbubbles no more.  Kit Includes: Salinity...

110V power supply for our DC24 accessories like the PMUP, GRO Refugium LED and Solenoid Valve.  You can use these when there are no available DC24 outputs on your EB832 or 1LINK but do have physical 110V outlets available.

AQUABUS EXTENSION CABLE (M/F)-VARIOUS LENGTHS The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to extend a M/M Aquabus Cable. Remember,...

1LINK is the marrying of the Aquabus communication standard, along with the power wires to drive higher power devices, all in one single cable.  One of the benefits of this is to avoid the need for a DC power brick for every 24V device in your...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

4-pin male to male cable many of you have been waiting for. It is ten feet long. This cable allows you to connect your DŌS to the 1LINK thereby eliminating the need for the DŌS to be connected to a power supply brick or the AquaBus cable. Just one wire!...

These cut outs fit both the deluxe and standard holes for a cleaner appearance.  The package contains 3x solid plugs to completely cover a hole and 3x small cord cutouts.

These cut outs fit both the deluxe and standard holes for a cleaner appearance.  The package contains 3x solid plugs to completely cover a hole and 3x small cord cutouts.

Usually used with aquarium accessories like RODI inputs, calcium reactor feed lines etc., this flow sensor can be placed in line with the flow on 1/4″ tubing, connected to the FMM, and communicate to your Apex the flow rate of water...

This three foot cable connects to the variable outputs built into the Apex, Apex Classic, and the VDM which has two DIN5 connectors.  This enables speed control of up to two TunzeTM Stream pumps that are compatible with...

The 1LINK module and the EB832 have two DC24 accessory outputs built that act like additional on/off outlets for DC24 devices. There are some Neptune Systems accessories, like our PMUP, that connect to these outputs directly.  There are...