Water Testing

HI70004P is a premium quality pH 4.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have...

Nitrite test kit for both freshwater and marine aquariums. About 100 tests, measures up to 1 mg/L Easy to use, high quality, European-made.

The HI740271 is a replacement filter holder with Luer lock (1 pc.) for use with the HI781 Low Range Marine Nitrate Checker.

The Phosphate Low Range Checker® HC Calibration Check Set - HI713-11 provides a simple solution to validating the Phosphate Low Range Checker® HC - HI713 in the range of 0.00 to 2.50 ppm (mg/L). This high-quality set of standards is...

Maximum accuracy is high on the agenda here at Hanna. Browse our Conductivity Calibration Solutions specifically produced for Conductivity meters and electrodes. Hanna conductivity electrodes can be calibrated in just a few minutes, wherever you are...

For Fresh and Saltwater Ammonia and ammonium are substances which should be converted rapidly into nitrite followed by nitrate and nitrogen gas.If this does not happen then the aquarium is not fully cycled or biological processes are not proceeding as...

Calcium Test Kit Calcium is one of the most important elements in a reef aquarium. Reef invertebrates such as corals, crustaceans, mollusks and even some types of encrusting algae need calcium to grow and remain healthy. Over time, calcium levels drop...

The API Nitrate Test Kit will allow you to accurately and easily measure the nitrate level and provides steps to remove it. Kit includes 2 liquid droppers, instructions on how to test and correct water conditions, a glass test tube, and 2 colors charts...

This is the perfect fluid for the storage of any pH or ORP/REDOX Electrode. American Marine Probe Storage Fluid will keep the tip properly moist and extend the life of your probe during storage (60 mL).

Easy to Read Instructions Essential for a Healthy Tank Accurate in both Fresh and Saltwater About Fritz Liquid Test Kits - Nitrate Nitrate is considered the non-toxic end product of the ammonia cycle. While not directly a problem for fish...

The Phosphorus Ultra Low Range Checker® HC Calibration Check Set provides a simple solution to validating the Phosphorus Ultra Low Range Checker® HC - HI736 that has a range of 0 to 200 ppb as phosphorus. This high-quality set of standards is...

The Phosphate Ultra Low Range Checker® HC Calibration Check Set provides a simple solution to validating the Phosphate Ultra Low Range Checker® HC - HI774 that has a range of 0.00 to 0.90 pp as phosphate. This high-quality set of standards is...

The Marine Alkalinity Checker® HC Calibration Check Set - HI755-11 provides a simple solution to validating the Marine Alkalinity Checker® HC - HI755 that has a range of 0 to 300 ppm CaCO3. This high-quality set of standards is...

Reagents for the HI774. Our HI774 Ultra Low Range Phosphate Checker will be essentially the same specifications as the HI736 Ultra Low Range Phosphorus Checker however it will not require a conversion but read directly in parts per million phosphates...

The HI702-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Copper High Range Checker® HC. These reagents follow the Bicinchoninate Method in which the reaction between...

The HI764-25 are the replacement reagents for the HI764 Nitrite Ultra Low Range Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each...

The HI736-25 are the replacement reagents for the HI736 Phosphorus Ultra Low Range Checker HC. These high quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for...

Extreme Accuracy. Easy to Test in 4 Steps - Zero the Checker, Add a regent to your water sample, Insert the Vile in the Checker, Read the Numbered Results. BOOM EASY. ZAIR. Zero, Add, Insert, Read. Includes reagents for 25x tests. The Hanna...

HI7061M is a general purpose cleaning solution that can be used for a variety of applications. Electrodes can become dirty from use and will produce inaccurate results even as they read correctly in a pH buffer. Hanna’s cleaning solutions eliminate...

HI70300M is a storage solution prepared with reagent grade chemicals that can be used to ensure optimum performance of your pH and ORP electrodes. It is necessary to store a pH electrode in a solution in order to keep the glass membrane of the pH...

Raises and maintains pH at 8.3 in all saltwater aquariums Can be used safely in reef tanks Contains borate for added stability Contains magnesium to alleviate precipitation effects Marine Buffer® will safely raise marine pH to 8.3. It will...

Accurate in both Fresh and Saltwater Easy to Read Instructions Essential to Monitoring Proper Ionic Balance About Fritz Liquid Test Kits - Calcium Calcium (Ca2+) is vital to many biological functions. In saltwater aquariums, calcium should...

Copper Test Kit Copper – a treatment for many parasitic infections – must be monitored in an aquarium or a pond. The copper level can drop too low for the treatment to be effective, or can increase to a point that is detrimental to fish...

This test kit is designed for both freshwater and saltwater aquariums, ponds, and turtle enclosures. The kit provides fast, easy, and accurate measurements. These kits include an easy to read color chart so that the results are clear...

PhosGuard is spherical. Its shape allows for maximum water flow through the media. Granular phosphate removers can become compacted, dramatically limiting their capacity to remove phosphate. If the media can’t come into contact with the water, it...

Deionized water for your research needs. Air-tight seal to ensure the quality of the solution. Marked with lot number and expiration date.

pH/ORP electrode storage solution. To minimize clogging and ensure fast response time, always keep the glass bulb and the junction of your pH electrode moist. Store the electrode with a few drops of MA9015 storage solution in the protective cap.

Accurate in both Fresh and Saltwater Essential when Medicating with Copper-based Treatments Measures Free and Total Copper About Fritz Liquid Test Kits - Copper Copper is commonly used in aquariums to treat external parasitic infections,...

Easy to Read Instructions Essential for New Tank Cycling Works in both Fresh and Saltwater About Fritz Liquid Test Kits - Nitrite Nitrite is produced continually during the ammonia cycle by nitrifying bacteria in the biological filter...

The HI781-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their HI781 Marine Nitrate Low Range Colorimeter. These reagents follow a colorimetric method in which the reaction between...

Maximum accuracy is high on the agenda here at Hanna. Browse our Conductivity Calibration Solutions specifically produced for Conductivity meters and electrodes. Hanna conductivity electrodes can be calibrated in just a few minutes, wherever you are...

Do you think it’s important to maintain salinity precisely? We’re with you. That’s why we created AccuraSea Seawater Reference Solution, the only calibration solution of its kind made from real seawater. It’s pure natural sea...

PhosBond™ is a revolutionary new product that combines the phosphate removing capabilities of both aluminum oxide and granular ferric oxide into a singular material forming a synergistic effect. It rapidly removes phosphates and silicates from...

East to Read Instructions Essential for a Healthy Tank Accurate in Freshwater About Fritz Liquid Test Kits - GH General hardness (GH) is commonly overlooked in many aquariums, but this parameter plays a very important role in your...

East to Read Instructions Essential for a Healthy Tank Accurate in both Fresh and Saltwater About Fritz Liquid Test Kits - Alkalinity Carbonate hardness, or alkalinity (KH), is the measure of both carbonates and bicarbonates present in the...

The HI731315 are spare glass cuvettes and plastic caps used with the HI7XX Checker® HC colorimeters. Each cuvette has a 10 ml level mark to measure the appropriate volume. The HI731315 includes 2 cuvettes and 2 caps. 10 ml level mark for...

If the pH is too low then the cause may be a too low alkalinity and/or insufficient aeration. A low pH can be corrected by improving aeration and by increasing the alkalinity to NSW (Natural seawater) value or upto approx 25% above NSW levels. The...

The HI717-25 are the replacement reagents for the HI717 Phosphate High Range Checker® HC. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet...

Get your replacement reagents for your HI701 Free Chlorine Checker® HC today. These high-quality reagents are manufactured in our state-of-the-art facility and are clearly marked with the lot number and expiration date on each packet for...

PH storage solution for HM Digital’s PH-200 / PH-80 as well as other brands of pH meters. Always make sure your sensor is kept in an electrode storage solution. If dry, refill the pH meter cap with the PH-STOR storage solution. The sponge should be...