Description
The NEW 2026 GEO AR836 Algae Reactor Commercial is designed to filter your aquarium water by removing phosphates, nitrates, Co2 and help raise your aquarium pH without the use of artificial media. This amazing reactor incorporates THREE 29″ external full spectrum LED bars with 120 watts combined power to promote amazing algae growth. Since there is an abundance of light we have included a 6 position dimmer switch so you can slowly acclimate new algae to your reactor without damaging it. We suggest starting at level 2 and every two weeks go up one level until reaching level 5. Our external LED bar design does not heat up the internal water temperature and are easily removed for maintenance. These LEDs run for years and are field tested for over 10 years. Not to worry if you have an issue with them they come with a one year warranty and have a low replacement cost when compared to our competitors. This commercial reactor also includes one inch true union ball valves for both input and output allowing high flow through the reactor. We have also included a 1/2″ drain valve at the base of the reactor to help with drainage for maintenance.
NOTICE: TO AVOID ELECTROCUTION THIS REACTOR SHOULD NEVER BE SUBMERGED IN WATER DUE TO THE LED BARS. ALWAYS REMOVE LED BARS BEFORE CLEANING REACTOR.
When you receive your new reactor make sure to look for the SMART Card attached to the body for quick set up instructions and videos.
Specifications:
- Suggested water flow 500-800 GPH
- Aquarium size for 400-1000 gallons depending on stock load
- 8″ diameter reaction chamber and 36″ tall
- Comes with THREE Reef Brite Full SPECTRUM LED bars total 120 watts
- LED bars come with a 5 position dimmer switch to acclimate newly introduced algae.
- Removable LED bars can also be used as viewing windows
- Vinyl wrap provides 180 degree refection inside
- All acrylic construction
- 1/2″ thick flange, lid and base
- Key hole slot for lid removal
- Full access to the chamber
- 1″ True union ball valve input and output on lid. Comes with both slip and threaded fittings.
- 1/2″ True union ball valve at base for drainage comes with both slip and threaded fittings.
- 10″ diameter foot print, 41″ overall height
- Comes with detachable under lid screen for easy maintance
- Comes with one piece – three tier removable inner tree for Chaetomorpha or other algae type growth.
Suggested add on items:
- Chaetomorpha
- 1″ ID silicon tubing
- Feed pump Vectra L2
