Control

Please note: CONTROL XP8 ONLY - Nothing else is included. Achieve Ultimate Security with the HYDROS Control XP8 Power Strip The HYDROS Control XP8 is an eight 120V AC outlet energy bar and can control eight HYDROS WiFi devices with individual power...

This HYDROS Drive Port Cable (72 inches long) is designed to connect to an available Drive port on a Kraken, X2, X4, XD, or other HYDROS Control directly to power small 12V devices such as ATO pumps, cabinet LED lights, fans, solenoids, and steering...

The ReefATO+ sensor requires the electrical conductivity levels that are typical for seawater to work properly and therefore this system will not work for freshwater systems. The ReefATO+ is an exceptionally reliable auto top-off system that includes a...

With the Fauna Marin Multi-Reference Solution, you can test your test kits under accurate conditions. Our Reference Solution is the first to be based on a saltwater matrix and is quality tested using our ICP-AES testing machine. We use a saltwater matrix...

The PM1 probe module is just what you need if you want to monitor pH or ORP in your tank. And, there is an added bonus, you get an extra temperature port as well as six I/O switch inputs for use on ATO, feed buttons, or whatever else you may come up...

Be alerted of water spillage and take corrective action before disaster strikes Optical sensor technology More reliable than analog counterparts Epoxy-coated and corrosion-resistant Can be reused after contact with water Nonreactive to metallic...

The Red Sea ReefCan is an Auto Top Off reservoir designed to either fit in the cabinet alongside a sump or failing that, at the side of the cabinet on the outside. It will come in two sizes, a 40 liter/10.6-gallon volume, and an 18 liter/4.8 gallon,...

Lab Grade Salinity/Conductivity Probe Kit Keep track of the salinity in your marine aquarium with the CoralVue HYDROS Salinity Kit. This kit includes the necessary 28ppt and 35ppt calibration solutions to ensure precise conductivity...

Inkbird Dual Temperature Controller with Dual Aquarium Probes & WIFI control.  WIFI smart controller supports both IOS & Android，WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature...

The Red Sea ReefCan is an Auto Top Off reservoir designed to either fit in the cabinet alongside a sump or failing that, at the side of the cabinet on the outside. It will come in two sizes, a 40 liter/10.6-gallon volume, and an 18 liter/4.8 gallon,...

Requires a HYDROS System to operate With a HYDROS DC Micro Pump and a HYDROS Optical Water Level Sensor (or Float Sensor), you can use the HYDROS Control 2 and Control 4 as an auto top-off (ATO) system. Just plug the pump into a...

Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor itself uses BSPP threads so for North...

Direct Pump Driver - For IceCap Gyre WE pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

Requires a HYDROS System to operate Protect your aquarium, home, or office from total disaster The HYDROS Rope Leak Detection Sensor is a flexible line that detects the presence of moisture anywhere along the rope. Kit Includes: Leak...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

The HYDROS Launch is a multifaceted aquatic support system that combines various features into a single controller. It's an all-in-one solution that allows you to manage a wide range of aquarium functions easily. The HYDROS Launch...

This Heating Element Required a Heating Controller to Operate! - https://www.saltwateraquarium.com/hc-810m-digital-temperature-controller-up-to-800-watts-finnex/ The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from...

Requires a HYDROS System to operate The HYDROS Skimmer Sensor serves a very specific and important role: it prevents your protein skimmer from overflowing onto the floor or back into your sump. The way it works is easy: just place the sensor inside...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

Direct Pump Driver - For Reef Octopus Varios / Pulse WE pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

This 9ft long extension cable for HYDROS Drive Accessories for Control 2 and Control 4.

This 9ft long extension cable for HYDROS Sense Accessories for Control 2 and Control 4.

Cable Tie & Mount Parts Kit for Ecotech Marine Vortech Pumps. Includes 12 Cable Ties and 12 Mounting Tabs that attach to the aquarium glass.

Probably the most popular sized level sensor this is the ideal sensor for your average containers used in and around aquarium.  This will be the ideal sensor for measuring the return pump section of your sump.   You will be able to make...

We have been on the hunt for a reliable heating element that solves a lot of the issues we currently have with other heaters in the hobby. We have always had issues with heaters that have built-in controllers and segregating the controller out from the...

This is a power supply for the Neptune Systems FMM, DOS, ATK and Trident.

3 Water Level Sensors for Added Redundancy Requires a HYDROS System to operate The HYDROS Triple Optical Water Level Sensor can be used for a variety of aquarium applications, such as sensing when your tank needs to be topped off or detecting when a...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

The 1LINK module and the EB832 have two DC24 accessory outputs built that act like additional on/off outlets for DC24 devices. There are some Neptune Systems accessories, like our PMUP, that connect to these outputs directly.  There are...

The seneye+ disposable slide adds pH and NH3 monitoring to your seneye along with alerts and graphs for these dangerous pollutants. Each slide lasts 30 days. For use in conjunction with all seneye devices. Everyone should test their water to ensure...

Maintaining consistent salinity in your aquarium is key to the well being of every organism inside it. And, as busy as we sometimes are, we don’t even realize our parameters are out of whack until it’s too late. With this module, your Apex...

Bring the award-winning pumps and lights from EcoTech Marine and AquaIllumination wirelessly under the control of the easy to use, yet powerful, Neptune Systems’ Apex and Apex Fusion interface. Scheduled Feeding With the Apex, you can...

This unique one-of-a-kind vacuum pump is designed to lift water with its diaphragm and flappers.  There are many applications for this pump: drip system for reptile terrariums, watering device for chameleons and small frogs, circulating pump, water...

The TUNZE® Osmolator® 3 nano is a simple and safe device with just one sensor for maintaining a constant water level in aquarium systems up to approx. 250 liters (66 US gal.), can be placed in cabinet filter systems or directly on the...

Connect external switches and I/O Inputs to your Apex When connected to the I/O Port of your Apex, Apex Lite, or PMx module, the Breakout Box gives you an easy way to connect up to six external switch inputs to your Apex. Examples of things you might...

Direct Pump Driver - For Maxspect Gyre 330/350 WE Pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

M series heaters combine modern aesthetics with reliable Italian construction. Employing an ultra-slim profile, M heaters are a welcomed departure from traditional, more bulky designs. The M series is highlighted by its reflective...

A redesigned display module has been created with a slick new look that matches the color scheme. Orange LED

Some of the most successful reef aquariums employ the use of a macroalgae-filled growth area or refugium for the purpose of nutrient control. The GRO is a specialized, 20W LED light designed to grow many types of common macroalgaes (i.e. Chaetomorpha)...