Fragging

Oceans Wonders Ceramic Coral Frag HexaDisks are perfect for the propagation or fragging of hard and soft branching corals such as Acropora, Birdsnest, Montipora, Kenya Trees, Xenia, ect.  They are 1-1/4" wide across the points and...

A no-rust aquarium tweezer/tong that has a nice firm grip and a long reach. The Never Rust Aquarium Tweezers feature an all-plastic design and a soft-grip replaceable tip. The overall length is a generous 11: with wide grab width for those larger frags.

Oceans Wonders Coral Frag Rocks are perfect for the propagation or fragging of hard and soft branching corals such as Acropora, Birdsnest, Montipora, Kenya Trees, Xenia, ect. They are approximately 1-1/2" x 2" and...

3" Ceramic Frag Tile 5/16" thick

Oceans Wonders Ceramic Coral Frag Plugs are perfect for the propagation or fragging of hard and soft branching corals such as Acropora, Birdsnest, Montipora, Kenya Trees, Xenia, ect. They have a 3/4" crown with a 7/16" base and fit perfectly...

Oceans Wonders Ceramic Coral Frag Disks are perfect for the propagation or fragging of hard and soft branching corals such as Acropora, Birdsnest, Montipora, Kenya Trees, Xenia, ect.  They are 1-1/4" in diameter and...

SnappGrid Interlocking EggCrate - Get Cre-EGG-tive Raise your corals, raise your equipment and raise your expectations when you think of Innovative Marine's vision on what we should be calling standard egg crate. The SnappGrid is a black interlocking...

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from...

Cyanoacrylate (CA) Reef Glue GEL IMPROVED! Unique pin cap has a needle embedded into it that is inserted into the applicator spout every time the cap in put on the bottle, eliminating clogs!  No more messy tubes to deal with. Over 4 Times as...

3" Aragonite Frag Disk 5/16" thick

Oceans Wonders Coral Frag Disks are perfect for the propagation or fragging of hard and soft branching corals such as Acropora, Birdsnest, Montipora, Kenya Trees, Xenia, ect. They are 1-1/4" in diameter and 5/16" thick...

Want to frag your corals but have no where to place the frags? Oceans Wonders MAG disks will secure your new coral frags to the sides or on the back of your tank or even on overflows, the locations are nearly endless with these mag disks. They are...

Oceans Wonders Ceramic Coral Frag Plugs are perfect for the propagation or fragging of hard and soft branching corals such as Acropora, Birdsnest, Montipora, Kenya Trees, Xenia, ect.  They are 1-1/4" in diameter and...

ASI Aquarium Silicone Sealant has been specifically formulated for the fabrication of fresh and salt-water aquariums.  This high modulus component RTV Silicone Sealant forms strong cohesive bonds to glass without the need of primers.  The...

Add to your glue joints when bonding Marco Rocks products to create a seamless look. Made from pure powdered Marco Rocks. MR Powder packaging: 3 lb jars

Oceans Wonders coral frag tools are made with 316 surgical stainless steel.  Always rinse tools under HOT tap water and dry thoroughly before storing. This will ensure long lasting durability and tool protection.  Never store tools in...

Oceans Wonders coral frag tools are made with 316 surgical stainless steel.  Always rinse tools under HOT tap water and dry thoroughly before storing. This will ensure long lasting durability and tool protection.  Never store tools in...

Oceans Wonders new Coral FRAG HUBS are perfect for safely holding all of your frags in one convenient spot in your aquarium. Our frag hubs are available in a variety of sizes with 5, 10 or 20 holes. They are made from the same material as our popular...

A 100% reef safe glue with a thick viscosity and can be used underwater. Each pack includes 20 .18oz single use squeeze tubes.

Oceans Wonders Coral Frag Disks are perfect for the propagation or fragging of hard and soft branching corals such as Acropora, Birdsnest, Montipora, Kenya Trees, Xenia, ect. They are 1-1/4" in diameter and 5/16" thick...

Oceans Wonders coral frag tools are made with 316 surgical stainless steel.  Always rinse tools under HOT tap water and dry thoroughly before storing. This will ensure long lasting durability and tool protection.  Never store tools in...

CorAffix Gel is an ethyl cyanoacrylate bonding compound with a thick gel consistency. It is very easy to use for attaching frags of stony corals, zoanthids, and some soft corals to plugs or bases. Available in a 20 gram tube with easy to use, re-sealing...

Oceans Wonders coral frag tools are made with 316 surgical stainless steel.  Always rinse tools under HOT tap water and dry thoroughly before storing. This will ensure long lasting durability and tool protection.  Never store tools in...

Oceans Wonders new Coral FRAG HUBS are perfect for safely holding all of your frags in one convenient spot in your aquarium. Our frag hubs are available in a variety of sizes with 5, 10 or 20 holes. They are made from the same material as our popular...

The IceCap Frag Transport Container is the perfect way to commute coral frags safely from one location to another. It is the ideal companion to bring with you on trips to your local fish store, frag swap, club meeting, or aquarium show! Hold Up to 8...

LittleRox are pressure washed, natural oolitic limestone rocks from Florida. They can be used to create rubble zone on the bottom in the freshwater cichlid tanks or in the marine reef aquariums. LittleRox are also ideal bases for attaching coral frags,...

Reusable Coral- and decoration glue for fresh- and saltwater-aquaria! No sticky hands and no adhesive residue after working with our new Aqua Scape Fix! Simply pour warm water (<42°C) into the amount to be used and mix until the composition...

Oceans Wonders new Coral FRAG HUBS are perfect for safely holding all of your frags in one convenient spot in your aquarium. Our frag hubs are available in a variety of sizes with 5, 10 or 20 holes. They are made from the same material as our popular...

Our Coral Pointer Rods are made of a fluorescent reef-safe acrylic that will glow bright green under actinic lighting, allowing your friends or customers to easily choose the exact frag they want without putting any hands in the tank. 17.5" long 1/4"...

Nano-Tech Bio-Plugs don't just hold coral frags—they help filter water and feed corals! These are no ordinary frag plugs! They are Maxspect Nano-Tech Bio-Plugs—which are made out of the same porous ceramic beads as Maxspect’s...

Handle large coral branches effortlessly Designed specifically for marine aquariums Anti-corrosion components Stainless steel, anodized with chromium Curved blades for a cleaner cut Heavy duty-- can handle 1" branches with ease

Oceans Wonders Coral Frag Disks are perfect for the propagation or fragging of hard and soft branching corals such as Acropora, Birdsnest, Montipora, Kenya Trees, Xenia, ect. They are 1-1/4" in diameter and 5/16" thick...

30 Count - Ceramic Frag Disks - Purple

LittleFeet are flat limestone bases that can be used to provide a stable footing for large corals or frags. The flat bottom makes it easy to position a coral anywhere on the bottom of an aquarium or culture raceway. The base can even be buried in the...

Seachem’s Coral Plugs™ are a chemically advanced means of supplying a unique platform for the stable mounting and/or grow out of all coral fragments and colonies. They are enhanced with calcium and magnesium to aid corals in rapid and secure...

SHOW OFF YOUR TANK! FL!PPER Aquarium Products Orange filter lens easily attaches to your DeepSee Aquarium Viewer! Great for showing off your beautiful coral specimens with both Magnification and Color Optimization! Orange Lens filters blue light to make...

Special plastic two-component mass for joining small rocks and attaching stony corals to rocks. It does not cause water impurity and is not toxic for reef animals. Both components should be mixed in equal amounts outside the aquarium and then used within...

Maxi-Cure extra thick CA is the best CA for fragging corals, including GE’s Lexan MAXI-CURE is the best choice for saltwater. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or...

Oceans Wonders coral frag tools are made with 316 surgical stainless steel.  Always rinse tools under HOT tap water and dry thoroughly before storing. This will ensure long lasting durability and tool protection.  Never store tools in...

Oceans Wonders coral frag tools are made with 316 surgical stainless steel.  Always rinse tools under HOT tap water and dry thoroughly before storing. This will ensure long lasting durability and tool protection.  Never store tools in...