Apex Controller

AQUABUS EXTENSION CABLE (M/F)-VARIOUS LENGTHS The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to extend a M/M Aquabus Cable. Remember,...

1LINK is the marrying of the Aquabus communication standard, along with the power wires to drive higher power devices, all in one single cable.  One of the benefits of this is to avoid the need for a DC power brick for every 24V device in your...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

4-pin male to male cable many of you have been waiting for. It is ten feet long. This cable allows you to connect your DŌS to the 1LINK thereby eliminating the need for the DŌS to be connected to a power supply brick or the AquaBus cable. Just one wire!...

These cut outs fit both the deluxe and standard holes for a cleaner appearance.  The package contains 3x solid plugs to completely cover a hole and 3x small cord cutouts.

These cut outs fit both the deluxe and standard holes for a cleaner appearance.  The package contains 3x solid plugs to completely cover a hole and 3x small cord cutouts.

Usually used with aquarium accessories like RODI inputs, calcium reactor feed lines etc., this flow sensor can be placed in line with the flow on 1/4″ tubing, connected to the FMM, and communicate to your Apex the flow rate of water...

This three foot cable connects to the variable outputs built into the Apex, Apex Classic, and the VDM which has two DIN5 connectors.  This enables speed control of up to two TunzeTM Stream pumps that are compatible with...

The 1LINK module and the EB832 have two DC24 accessory outputs built that act like additional on/off outlets for DC24 devices. There are some Neptune Systems accessories, like our PMUP, that connect to these outputs directly.  There are...

Seamlessly integrate any aquarium controller or monitor into your cabinet and keep things organized with this adjustable mounting system. The system features an adjustable mounting plate with hinge, allowing you to position it for the best viewing angle,...

This cable connects to the 24VDC accessory connections on the 1LINK. This cable has two bare (tinned) wires on the other end so you could connect it up to a 24VDC device of your choosing so long as it draws no more than 35W. Examples might include a...

Apex LED Light Dimming Cable – 2 Channel Use this cable to connect two channels of 0-10V dimmable LED lights to your Apex System or Advanced LED Dimming Module – VDM Use this cable to connect two separate LED color channels from your 0-10V...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

4x Cut Outs to Cover the larger holes in the deluxe boards.

4x Cut Outs to Cover the larger holes in the deluxe boards.

Mount your Vortech Pump Controller in style.

Mount your Vortech Pump Controller in style.

Mount your Vortech Pump Controller in style.

Mount your Neptune APEX display in style. with this new APEX Display Holder. Simple Installation Features a simple mounting slot for super easy to mounting and aligning. This kit includes the mount and a mounting screw.

Mount your Neptune APEX display in style. with this new APEX Display Holder. Simple Installation Features a simple mounting slot for super easy to mounting and aligning. This kit includes the mount and a mounting screw.

Mount your Neptune APEX display in style. with this new APEX Display Holder. Simple Installation Features a simple mounting slot for super easy to mounting and aligning. This kit includes the mount and a mounting screw.

Mount your Vortech Pump Controller in style.

Mount your Neptune APEX display in style. with this new APEX Display Holder. Simple Installation Features a simple mounting slot for super easy to mounting and aligning. This kit includes the mount and a mounting screw.

These grounding probes come with a non-corrosive titanium rod attached to a 10ft stainless wire lead, a three prong grounded plug, with an additional grounding eyelet. These probes also utilize an insulated transition joint, insuring against corrosion...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

The Crossover Diet from Neptune Systems is a new type of food that was designed specifically for coral reef tanks and specifically for automatic feeding systems. Working closely with Reed Mariculture (the manufacturer of Reef Nutrition foods) we came up...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

The best selling automated tester ever released has been modified to now test Nitrates and Phosphates with a level of precision, accuracy and ease of use not seen before Perfect for managing and understanding nutrients to Manage Feeding Plan Tank...