Control

The HYDROS Water Level Sensor is an optical sensor you can use for a variety of aquarium applications, such as sensing when your tank needs to be topped off or to detect when a dosing container needs a refill. It plugs into any Sense Port on a HYDROS...

This Heating Element Required a Heating Controller to Operate! - https://www.saltwateraquarium.com/hc-810m-digital-temperature-controller-up-to-800-watts-finnex/ The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from...

The HYDROS Automatic WiFi Fish Feeder is suitable for a variety of fish foods. A HYDROS Control is required to operate. The Fish Feeder is WiFi controllable using the free HYDROS app for Android and iOS/Apple mobile devices. You can now feed your fish...

Maintaining consistent salinity in your aquarium is key to the well being of every organism inside it. And, as busy as we sometimes are, we don’t even realize our parameters are out of whack until it’s too late. With this module, your Apex...

The seneye+ disposable slide adds pH and NH3 monitoring to your seneye along with alerts and graphs for these dangerous pollutants. Each slide lasts 30 days. * the seneye+ has a recommended use by date of 12 months from date of manufacture, always store...

Kit Includes 1x FMM Module, 2x Solid Surface Leak Detection Probe. Aquarium leaks are one of the most feared events for even the most seasoned aquarist – and for good reason. When it comes to leaks, it’s not just about whether you’ll...

M series heaters combine modern aesthetics with reliable Italian construction. Employing an ultra-slim profile, M heaters are a welcomed departure from traditional, more bulky designs. The M series is highlighted by its reflective...

Direct Pump Driver - For TUNZE 0-10V pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

This is a power supply for the Neptune Systems FMM, DOS, ATK and Trident.

This 6 foott long HYDROS System Command Bus Cable allows HYDROS devices to communicate and even provide power to the Control 2 and Control 4.

This cable connects to the 24VDC accessory connections on the 1LINK. This cable has two bare (tinned) wires on the other end so you could connect it up to a 24VDC device of your choosing so long as it draws no more than 35W. Examples might include a...

With huge features jammed in a tiny package, the Duetto2 is the perfect ATO for your aquarium. XPAqua’s proprietary dual-optical sensor packs two precise level sensors in one incredibly small package. In addition to keeping your water level...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

The Fluid Monitoring Kit Includes: 1x - FMM Fluid Monitoring Module 1x - 1" Flow Sensor (FS-100) 2x - 1/2" Flow Sensor (FS-50) 2x - 1" Unions 4x - 1/2" Adapters FMK What's In The Box? The FMM (Fluid Monitoring Module) is a multi-purpose...

The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from saltwater damage.  Virtually unbreakable, especially in comparison with the standard glass aquarium, these tube are built to last.  The ultra heating...

Terminates the Hydros Collective

The PMUP is a multi-purpose pump that can be used for many different tasks on your aquarium.  This listing includes a Power Supply. Automatic Top-Off (ATO) Carbon reactors GFO reactors Biopellet reactors Many other salt or freshwater...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

110V power supply for our DC24 accessories like the PMUP, GRO Refugium LED and Solenoid Valve.  You can use these when there are no available DC24 outputs on your EB832 or 1LINK but do have physical 110V outlets available.

Why purchase a separate and expensive auto top-off system when HYDROS can do the job for you? The HYDROS Auto Top-Off Kit comes with everything you need to use your HYDROS device (like the Control 2 or Control 4) as an ATO system...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

The perfect solution to help organize and control the rat's nest of wires that most aquariums suffer from.  This board was created to easily allow you to mount an apex, power strips, equipment controllers and much more so they are easily accessed an...

The Energy Bars available for our Apex systems are much more than a glorified power strip. In fact, this component of your aquarium controller equipment is far more important than most people realize – and not all systems are created equal! It...

Tube Holder - Sea Side Aquatics

308-WIFI： [WIFI & APP] WIFI smart controller supports both IOS & Android WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.  [Dual Relay Output] Dual relay...

Skimmer Security Made Simple Smart Skimmer Security by AutoAqua uses the uniquely-designed contactless optical sensor to prevent the protein skimmer from overflows. No moving parts to service or fail. Magnetically coupled sensor makes it super...

The ReefATO+ sensor requires the electrical conductivity levels that are typical for seawater to work properly and therefore this system will not work for freshwater systems. The ReefATO+ is an exceptionally reliable auto top-off system that includes a...

Moonlight in the ocean is believed to be as significant as the time spent in full daylight. Moonlight triggers various internal and external biological activities among the many thousands of reef organisms. Moonlight LEDs for your aquarium emulate that...

This attractive fluid containment system stores your dosing fluids in style and even tells you when it’s time to refill! Each side stores two liters (2L) of fluid Connects directly to your DŌS Optical sensors inform your APEX when...

A concentrated reagent specifically for the Alkatronic Alkalinity Controller. For every 1 part reagent, mix 4 parts RO/DI water. Every 1000mL of concentrate will produce 5000mL Total of solution. Store locked up Keep away from children. Not for human...

Usually used with aquarium accessories like reactors, carbon/GFO filters, etc., this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

Usually used with aquarium accessories like RODI inputs, calcium reactor feed lines etc., this flow sensor can be placed in line with the flow on 1/4″ tubing, connected to the FMM, and communicate to your Apex the flow rate of water...

Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second...

Bring the award-winning pumps and lights from EcoTech Marine and AquaIllumination wirelessly under the control of the easy to use, yet powerful, Neptune Systems’ Apex and Apex Fusion interface. Scheduled Feeding With the Apex, you can...

The Reef Breeders Prism-ATO  is designed to work with aquariums of all sizes, from pico desktops and All-in-One aquariums with limited space, to large reef tanks with full sumps. The Prism ATO has 3 sensors and registers your water level in a...

Every day it seems there is yet another LED light fixture released. Each one with its own method for control and dimming. With this module, you can outfit your Apex System with the ability to control many different brands of LED lights…from...

1LINK is the marrying of the Aquabus communication standard, along with the power wires to drive higher power devices, all in one single cable.  One of the benefits of this is to avoid the need for a DC power brick for every 24V device in your...

Plug this probe into your FMM and then place it underneath your carpet near your aquarium. Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take place. Don’t have carpet, see the next...