Control

Consistent flow - Constant steady airflow. Easily adjust the air flow rate for the diffuser Quiet operation - Vibration resistant rubber feet and eye hook, and insulated housing prevent excess vibration and noise Customizable bubbling patterns - The...

The GH Series offers simple and easy installation with the use of included suction cups. With the highly visible temperature setting, the GH Series is easy to set and adjust to the desired temperature with the use of the Temperature Adjustment Knob...

Replacement syringe & needle kit for the Mastertronic The set includes: 4 Plastic syringes (without needles) 6 Replacement needles

The Finnex Compact Electronic Titanium Heaters maintain water temperature within +/-2ºF of the set value providing a safe, healthy and stable temperature for your tank. The titanium tubes are corrosion resistant which makes these virtually...

This kit was created to be used in conjunction with Neptune Systems salinity/conductivity probe.  It allows the probe to stay clean and fixes a well know issue with the salinity probe.  Microbubbles no more.  Kit Includes: Salinity...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

The Finnex Compact Electronic Titanium Heaters maintain water temperature within +/-2ºF of the set value providing a safe, healthy and stable temperature for your tank. The titanium tubes are corrosion resistant which makes these virtually...

BUBBLE MAGUS SEASIDE AQUATICS MAGNETIC AQUARIUM QUAD (4) PROBE HOLDERHolder can fit up to four probes. It’s design to hold ph, ORP, salinity and/or temp probe.It has a magnet on the back and can be easily install on the sump wall, baffle divider or...

Jolly Preset Heaters have an Auto Shut Off feature that automatically turns the heater off when temperature is reached. JOLLY plastic heaters are designed for small freshwater, marine and turtles tanks. Their plastic casing makes them very durable...

The HYDROS Slim Temperature Sensor Probe is only 1.6” long and 0.32” wide. It’s all-black solid waterproof IP68 construction is built for years of reliable service. It is a “set it and forget it” temperature...

The HYDROS Temperature Sensor is an easy and affordable way to prevent your aquarium water from becoming too cold or too hot. It monitors the water temperature in your aquarium so you can keep it within the safe zone for fish, coral, and inverts. The...

The HYDROS DC Solenoid Valve is a handy HYDROS Control 2 and Control 4 accessory that provides easy on/off RO or RO/DI water flow. You can connect the solenoid to your reverse osmosis filter and use it to top-off your tank if you...

With a HYDROS DC Micro Pump and a HYDROS Optical Water Level Sensor (or Float Sensor), you can use the HYDROS Control 2 and Control 4 as an auto top-off (ATO) system. Just plug the pump into a Drive Port and the optical water level...

110V power supply for our DC24 accessories like the PMUP, GRO Refugium LED and Solenoid Valve.  You can use these when there are no available DC24 outputs on your EB832 or 1LINK but do have physical 110V outlets available.

Extension Cable 5m, male-female for our sensors with BNC connector.

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

AQUABUS EXTENSION CABLE (M/F)-VARIOUS LENGTHS The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to extend a M/M Aquabus Cable. Remember,...

1LINK is the marrying of the Aquabus communication standard, along with the power wires to drive higher power devices, all in one single cable.  One of the benefits of this is to avoid the need for a DC power brick for every 24V device in your...

The HYDROS WiFi Smart Plug is a smart power outlet designed to work with the CoralVue HYDROS platform. The Smart Plug has a 1 x 100-250V AC outlet that is WiFi controllable using the free HYDROS app for Android and iOS/Apple mobile devices. You can...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

4-pin male to male cable many of you have been waiting for. It is ten feet long. This cable allows you to connect your DŌS to the 1LINK thereby eliminating the need for the DŌS to be connected to a power supply brick or the AquaBus cable. Just one wire!...

Highly precise and stabilized reagent solution for KH Director. Available in 500 ml and 1000 ml bottles.

Jolly Preset Heaters have an Auto Shut Off feature that automatically turns the heater off when temperature is reached. JOLLY plastic heaters are designed for small freshwater, marine and turtles tanks. Their plastic casing makes them very durable...

JOLLY plastic heaters are designed for small freshwater, marine and turtles tanks. Their plastic casing makes them very durable and safe. These heaters can be placed beneath the gravel, making them a good choice for turtle or reptile tanks. JOLLY is...

These cut outs fit both the deluxe and standard holes for a cleaner appearance.  The package contains 3x solid plugs to completely cover a hole and 3x small cord cutouts.

These cut outs fit both the deluxe and standard holes for a cleaner appearance.  The package contains 3x solid plugs to completely cover a hole and 3x small cord cutouts.

Usually used with aquarium accessories like RODI inputs, calcium reactor feed lines etc., this flow sensor can be placed in line with the flow on 1/4″ tubing, connected to the FMM, and communicate to your Apex the flow rate of water...

This three foot cable connects to the variable outputs built into the Apex, Apex Classic, and the VDM which has two DIN5 connectors.  This enables speed control of up to two TunzeTM Stream pumps that are compatible with...

Red Sea's ATO fits perfectly on the rear compartment of the Desktop Aquarium range to maintain a consistent water level in the sump area. This allows for quiet and consistent operation of the pump and skimmer Features of the Desktop ATO by Red...

Extension Cable 3m, male-female for our sensors with BNC connector.

The 1LINK module and the EB832 have two DC24 accessory outputs built that act like additional on/off outlets for DC24 devices. There are some Neptune Systems accessories, like our PMUP, that connect to these outputs directly.  There are...

With the Fauna Marin Multi-Reference Solution, you can test your test kits under accurate conditions. Our Reference Solution is the first to be based on a saltwater matrix and is quality tested using our ICP-AES testing machine. We use a saltwater matrix...

Seamlessly integrate any aquarium controller or monitor into your cabinet and keep things organized with this adjustable mounting system. The system features an adjustable mounting plate with hinge, allowing you to position it for the best viewing angle,...

This cable connects to the 24VDC accessory connections on the 1LINK. This cable has two bare (tinned) wires on the other end so you could connect it up to a 24VDC device of your choosing so long as it draws no more than 35W. Examples might include a...

Extension Cable 2m, male-female for our sensors with BNC connector.

Wear parts for 2 pumps for GHL Doser 2.1: 2x blue lids, 6x roller, 2x roller holder.