Control

This is a replacement vial for Mastertronic. It includes one (1) silicon cap.  DOES NOT include stirring magnet.

Not your standard Aquarium heater.  The Finnex Digital touch Control HMX series sports a sleek modernized black control face that is easily controlled via it's precision touch pad.  Corrosion-r3esistant, fast heater titanium tube is engulfed in...

The HC-0810M Finnex controller offers a precision digital control with LED digital display which maintains water temperatures at a constant level protecting your livestock from temperature fluctuations.  Easily adjustable high/low temperature...

This kit was created to be used in conjunction with Neptune Systems salinity/conductivity probe.  It allows the probe to stay clean and fixes a well know issue with the salinity probe.  Microbubbles no more.  Kit Includes: Salinity...

This Heating Element Required a Heating Controller to Operate! - https://www.saltwateraquarium.com/hc-810m-digital-temperature-controller-up-to-800-watts-finnex/ The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from...

The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from saltwater damage.  Virtually unbreakable, especially in comparison with the standard glass aquarium, these tube are built to last.  The ultra heating...

The all new Cobalt Aquatics NEO-Therm fully submersible electronic heaters feature a modern, super flat design with an easy to set “one touch” control system. The advanced electronic thermostat is accurate to ±0.5ºF and includes a...

The all new Cobalt Aquatics NEO-Therm fully submersible electronic heaters feature a modern, super flat design with an easy to set “one touch” control system. The advanced electronic thermostat is accurate to ±0.5ºF and includes a...

Say “Au Revoir” to your old reservoir. The Hydrofill Ti Reservoir is the next generation auto top off gadget that simplifies tasks involved for evaporated makeup water. The smart design offers 15 gallons of storage capacity and a mere (12...

The HYDROS Temperature Sensor is an easy and affordable way to prevent your aquarium water from becoming too cold or too hot. It monitors the water temperature in your aquarium so you can keep it within the safe zone for fish, coral, and inverts. The...

Not your standard Aquarium heater.  The Finnex Digital touch Control HMX series sports a sleek modernized black control face that is easily controlled via it's precision touch pad.  Corrosion-r3esistant, fast heater titanium tube is engulfed in...

We have been on the hunt for a reliable heating element that solves a lot of the issues we currently have with other heaters in the hobby. We have always had issues with heaters that have built-in controllers and segregating the controller out from the...

Direct Pump Driver - For IceCap Gyre WE pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

Peace at Mind Made Simple Featuring a Plug and Play design, Smart Level Security automatically detects the water level status when mounted. Magnetically-coupled sensor makes it easy to adjust to the desired level to secure your aquarium...

1LINK™ – Easy, one-click installation The WAV is the first of a line of aquarium products from Neptune Systems that will use a completely new interface. While many in the aquarium world continue to embrace wireless technologies for...

We have been on the hunt for a reliable heating element that solves a lot of the issues we currently have with other heaters in the hobby. We have always had issues with heaters that have built-in controllers and segregating the controller out from the...

Protect your aquarium, home, or office from total disaster The HYDROS Rope Leak Detection Sensor is a flexible line that detects the presence of moisture anywhere along the rope. Kit Includes: Leak sensing rope, adapter cable, and 10...

Adaptive Reef in conjunction with Harry's Aquatics is pleased to bring a full line of products designed to work with and enhance the user experience with aquarium controllers. From switch control boxes and 0-10v based devices to warning lights and...

No assembly requiredEasy installation (Clamp mounting bracket) Clamp mounting bracket can fit over aquarium walls up to 1/2" thickExtend Longevity of your lighting systemLow power consumptionAdjustable direction of air flowDimension: 8" x 6.5"x 1.6"Air...

The HYDROS Skimmer Sensor serves a very specific and important role: it prevents your protein skimmer from overflowing onto the floor or back into your sump. The way it works is easy: just place the sensor inside any protein skimmer collection cup...

The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from saltwater damage.  Virtually unbreakable, especially in comparison with the standard glass aquarium, these tube are built to last.  The ultra heating...

This 9ft long extension cable for HYDROS Drive Accessories for Control 2 and Control 4.

The perfect solution to help organize and control the rat's nest of wires that most aquariums suffer from.  This board was created to easily allow you to mount an apex, power strips, equipment controllers and much more so they are easily accessed an...

The all new Cobalt Aquatics NEO-Therm fully submersible electronic heaters feature a modern, super flat design with an easy to set “one touch” control system. The advanced electronic thermostat is accurate to ±0.5ºF and includes a...

AQUABUS EXTENSION CABLE (M/F)-VARIOUS LENGTHS The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to extend a M/M Aquabus Cable. Remember,...

Not your standard Aquarium heater.  The Finnex Digital touch Control HMX series sports a sleek modernized black control face that is easily controlled via it's precision touch pad.  Corrosion-r3esistant, fast heater titanium tube is engulfed in...

The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from saltwater damage.  Virtually unbreakable, especially in comparison with the standard glass aquarium, these tube are built to last.  The ultra heating...

The Finnex Compact Electronic Titanium Heaters maintain water temperature within +/-2ºF of the set value providing a safe, healthy and stable temperature for your tank. The titanium tubes are corrosion resistant which makes these virtually...

With a HYDROS DC Micro Pump and a HYDROS Optical Water Level Sensor (or Float Sensor), you can use the HYDROS Control 2 and Control 4 as an auto top-off (ATO) system. Just plug the pump into a Drive Port and the optical water level...

Made in Germany, 3 Year Warranty, Run Dry Protection! The obvious ideas are often the best. This also applies to the aquarium heating element. It is simply hung in the water and heats it up. The principle is the same as it was decades ago. But in the...

This 1 foot long HYDROS System Command Bus Cable allows HYDROS devices to communicate and even provide power to the Control 2 and Control 4.

Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor itself uses British Standard Parallel Pipe...

Mount your Vortech Pump Controller in style.

Kit Includes: 2x - EHEIM Thermostat E Heater - Made in Germany, 3 Year Warranty, Run Dry Protection & INK BIRD Dual Aquarium Thermostat Temp Controller for Redundancy! The obvious ideas are often the best. This also applies to the aquarium heating...

Introducing the Custom Cradle XL This is the XL Version - 4 probe holder A magnetically mounted, multifunction probe holder that organizes your devices in the most simple and efficient way possible. Other probes racks can lead to an unorganized...

Direct Pump Driver - For Maxspect Gyre 330/350 WE Pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

Generic Digital Thermometer with Probe, displays in both F and C.

This kit was created to be used in conjunction with Neptune Systems salinity/conductivity probe.  It allows the probe to stay clean and fixes a well know issue with the salinity probe.  Microbubbles no more.  Kit Includes: Salinity...

Monitoring the salinity, pH and temperature of the water is an important routine in the maintenance of a marine aquarium or marine aquaculture. The Hann HI981520 is an easy-to-use monitor that continuously monitors and displays salinity (via...

This wall mount allows you to easily mount your aquarium controller board to a wall. Dimensions: 11"L x 1.125"W x 2.5"H