Water Testing

KH Alkalinity - Carbonate Hardness Water AnalysisAlkalinity is essentially a means of quantifying the stability of pH in a solution, such as aquarium water. It is a measure of the concentration of various negatively charged ionic compounds (anions) such...

KH Carbonate Hardness Test Kit The API® KH Carbonate Hardness Test Kit tests fresh or saltwater aquariums for carbonate hardness (KH), and helps monitor water quality and prevent invisible water problems that can be harmful to fish and plants...

The glass cuvette is an important component of the optical system in all colorimetric and turbidimetric measurements. Light reaches the sample by first passing through the cuvette glass. Based on the sample, the light is absorbed, transmitted, or...

53.0 mS standardized fluid for calibrating the PINPOINT® Salinity Monitor with conversion chart

The Phosphate Ultra Low Range Checker® HC Calibration Check Set provides a simple solution to validating the Phosphate Ultra Low Range Checker® HC - HI774 that has a range of 0.00 to 0.90 pp as phosphate. This high-quality set of standards is...

HI70010P is a premium quality pH 10.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers...

The Hanna Ammonia Low Range Checker bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color...

The HI 98501 Checktemp® is a digital thermometer with stainless steel penetration probe. It delivers high accuracy temperature measurements over a wide temperature range without worrying about breakage or condensation. The Checktemp® offers NO...

772 CheckerThe HI772 Checker®HC (Handheld Colorimeter) provides a simple, accurate and cost effective way to measure alkalinity in degrees of calcium hardness, commonly abbreviated as dKH. Critical to marine environments, alkalinity not only provides...

The TDS-4TMA handheld meter is ideal for testing TDS and salt levels of freshwater aquariums and ponds. It can also be used for testing water filtration and purification systems, such as RO and DI, to know when to changes filters and membranes...

Reef Buffer™ will also raise carbonate alkalinity; however, it is intended primarily for use as a buffer in a reef system where the maintenance of a pH of 8.3 is often difficult. When pH is not an issue, Reef Builder™ or Reef Carbonate™...

High levels of silicate can lead to diatom blooms. Some tap water and even RO water may have silicates and should be monitored with a Silicate Test Kit. This kit includes a test vial, syringe, three reagents and a color chart. It offers two methods of...

HI731318 are microfiber cloths for wiping the cuvettes used in Checker HC (HI700 series) handheld colorimeters, photometers (HI96000 portable series and HI83000 benchtop series) and turbidity meters. These cloths remove dirt, grease and fingerprints...

Red Sea's user-friendly Magnesium filtration test provides a quick and reliable measurement of Magnesium in your aquarium to an accuracy of either 50ppm or 100ppm according to your needs.

Replacement double junction pH electrode for Milwaukee pH meter or pH/CO2 meter. BNC connector.

Triton Labs N-DOC Organics Professional Seawater Analysis COMPREHENSIVE TESTING FOR NITROGEN, ALKALINITY & DISSOLVED ORGANIC CARBON Introducing expanded, high resolution testing for key Nitrogen compounds, Dissolved Organic Carbon and extended...

This test can be used to measure any ionic copper in your source water or to monitor copper levels during parasite treatments. The test kit includes a test cylinder and reagent, plus a color chart to measure the copper, accurate to 0.05 PPM. It can be...

Red Sea’s Algae Control Pro Kit includes high accuracy colorimetric comparator tests for the exceptionally high accuracy measurement of nitrate and phosphate. The nitrate & phosphate tests are essential for the accurate dosing of Red...

The HI740271 is a replacement filter holder with Luer lock (1 pc.) for use with the HI781 Low Range Marine Nitrate Checker.

Red Sea’s Calcium Pro Test Kit is an advanced calcium titration test, measuring the level of calcium in your reef aquarium to an exceptionally high accuracy of 5 ppm. This test kit enables the accurate dosing of Red Sea’s Reef Foundation...

Red Sea’s Magnesium Pro Test Kit is an advanced titration test, measuring the level of magnesium in your reef aquarium to an exceptionally high accuracy of 20 ppm.The Magnesium Pro Test test kit enables the accurate dosing of Red Sea’s Reef...

Maximum accuracy is high on the agenda here at Hanna. Browse our Conductivity Calibration Solutions specifically produced for Conductivity meters and electrodes. Hanna conductivity electrodes can be calibrated in just a few minutes, wherever you are...

Trust your aquarium to Salifert.This test will accurately measure the form of iodine found in seawater, iodate.  Salifert's wide range of available tests have all been designed to detect the smallest traces of certain elements, without interference...

HI70007P is a premium quality pH 7.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have...

The Marine Nitrate High Range Checker® HC Calibration Check Set - HI782-11 provides a simple solution to validating the Marine Nitrate High Range Checker® HC - HI782. This high-quality set of standards is manufactured in our...

The Marine Calcium Checker® HC Calibration Check Set - HI758-11  provides a simple solution to validating the Marine Calcium Checker® HC - HI758 that has a range of 200 to 600 ppm calcium. This high-quality set of standards is...

Reagent refill for Red Sea Nitrate Pro Test Kit. Enough reagent for 100 tests. Red Sea reagent refills make this line of test kits one of the most affordable high quality test kits available.  

PhosGuard is spherical. Its shape allows for maximum water flow through the media. Granular phosphate removers can become compacted, dramatically limiting their capacity to remove phosphate. If the media can’t come into contact with the water, it...

Refractometer & Hydrometer Calibration Standard 1.0264 Specific Gravity 1.3394 Refractive Index 35 ppt Salinity 53 uS/cm at 25 deg c Overview Brightwell Aquatics Aquarium Reagents Refractometer & Hydrometer Calibration Standard is...

It’s all in the balance This combined test kit provides either 100 nitrite or 50 Nitrate and 50 Nitrite advanced colorimetric tests for marine aquariums. This kit is essential during the maturation of all marine and reef...

PINPOINT® Wireless Thermometer will measure the temperature at the waterproof probe tip on the remote sensor(s), utilizing a radio wave signal, and will display the temperature in Fº or Cº degrees. PINPOINT® Wireless...

PhosBond™ is a revolutionary new product that combines the phosphate removing capabilities of both aluminum oxide and granular ferric oxide into a singular material forming a synergistic effect. It rapidly removes phosphates and silicates from...

HI70004P is a premium quality pH 4.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have...

The HI190M is a compact and lightweight magnetic stirrer. With a small footprint, lack of laboratory bench space is no longer a concern. Built to last with a protective covering and a user-adjustable stirring speed, this small stirrer is great for...

Raises and maintains pH at 8.3 in all saltwater aquariums Can be used safely in reef tanks Contains borate for added stability Contains magnesium to alleviate precipitation effects Marine Buffer® will safely raise marine pH to 8.3. It will...

Standard portable meters with no frills! Milwaukee’s low cost durable meters for quick and reliable measurements.  Milwaukee’s Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom,...

MAGNESIUM REEFER NYOS® REEFER test kits - taking measurements at the laboratory level at an attractive price Water properties as close to nature are the key for every aquarium's success. However, monitoring relevant parameters in seawater is...

The Hanna Free Chlorine Checker bridges the gap between simple chemical test kits and professional instrumentation. Chemical test kits have limited accuracy and resolution since they rely upon the human eye to discern differences in color. Professional...

Do you think it’s important to maintain salinity precisely? We’re with you. That’s why we created AccuraSea Seawater Reference Solution, the only calibration solution of its kind made from real seawater. It’s pure natural sea...

HI740228 is a filter disc; part of accessory kit for preparation of samples to be analyzed with the HI781 Hanna Nitrate Checker photometers.