Control

M series heaters combine modern aesthetics with reliable Italian construction. Employing an ultra-slim profile, M heaters are a welcomed departure from traditional, more bulky designs. The M series is highlighted by its reflective...

M series heaters combine modern aesthetics with reliable Italian construction. Employing an ultra-slim profile, M heaters are a welcomed departure from traditional, more bulky designs. The M series is highlighted by its reflective...

The HTG Series is our premier line of fully submersible glass heaters with thermostat control. Our HTG heaters offer a compact design for versatile placement and are extra durable due to the built-in glass element. The thermostat control makes it simple...

For use with your top off or dosing pump1.5L - over all 12.40" tall by 3.80" diameter*** Caution ***Red Sea's NO3:PO4X chemical will crack and damage the containers, this product is not to be use with our containers.

The HYDROS Automatic WiFi Fish Feeder is suitable for a variety of fish foods. A HYDROS Control is required to operate. The Fish Feeder is WiFi controllable using the free HYDROS app for Android and iOS/Apple mobile devices. You can now feed your fish...

AQUABUS EXTENSION CABLE (M/F)-VARIOUS LENGTHS The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to extend a M/M Aquabus Cable. Remember,...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

The HTG Series is our premier line of fully submersible glass heaters with thermostat control. Our HTG heaters offer a compact design for versatile placement and are extra durable due to the built-in glass element. The thermostat control makes it simple...

This is a power supply for the Neptune Systems FMM, DOS, ATK and Trident.

This 24VDC powered, normally-closed (NC), solenoid valve has push-fit tubing input and outputs designed for standard 1/4″ tubing. The electrical connection on this solenoid valve fits the DC24 accessory ports found on the FMM, 1Link, and Energy Bar...

Plug this probe into your FMM and then place it on any surface where you want to detect stray water. Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take place.  Time is so critical when it...

Plug this probe into your FMM and then place it underneath your carpet near your aquarium. Upon contact with water this probe will communicate to your Apex and alerts or other actions can then take place. Don’t have carpet, see the next...

Usually used with aquarium accessories like reactors, carbon/GFO filters, etc., this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor...

Moonlight in the ocean is believed to be as significant as the time spent in full daylight. Moonlight triggers various internal and external biological activities among the many thousands of reef organisms. Many corals continue to grow under moonlight...

Replace your Temperature Probe, add one for another tank, or put one on your PM2/PM3 module for temperature compensated readings. Buy this probe if you are: Replacing an old probe. Adding another tank to your system via a PM1. Want to have more...

The S-Port & L-Port Breakout box is a versatile accessory that allows you to control any 1-10V device off of the ProfiLux controller. This accessory is especially useful for those looking to control their 1-10V devices, but do not have a...

The HPC heater series is a glass heater that uses an advanced digital processor that monitors and controls the water temperature in your aquarium. The heating controller receives temperature data from the remote sensor in the aquarium. The remote...

Consistent flow - Constant steady airflow. Easily adjust the air flow rate for the diffuser Quiet operation - Vibration resistant rubber feet and eye hook, and insulated housing prevent excess vibration and noise Customizable bubbling patterns - The...

Accurate temperature adjustments – Temperature scale can be adjusted between 66°F - 90°F. A secondary control knob allows for precise readjustment of the temperature within +/- 2°F Uniform temperature levels – Temperature...

M series heaters combine modern aesthetics with reliable Italian construction. Employing an ultra-slim profile, M heaters are a welcomed departure from traditional, more bulky designs. The M series is highlighted by its reflective...

The HTG Series is our premier line of fully submersible glass heaters with thermostat control. Our HTG heaters offer a compact design for versatile placement and are extra durable due to the built-in glass element. The thermostat control makes it simple...

Smart AC Socket is a simple accessory from AutoAqua that allows the use to swap out the small DC pump on a Smart ATO, Smart ATO Micro or AWC to any AC pump under 9amps power draw.

The HPC heater series is a glass heater that uses an advanced digital processor that monitors and controls the water temperature in your aquarium. The heating controller receives temperature data from the remote sensor in the aquarium. The remote...

The Finnex Compact Electronic Titanium Heaters maintain water temperature within +/-2ºF of the set value providing a safe, healthy and stable temperature for your tank. The titanium tubes are corrosion resistant which makes these virtually...

M series heaters combine modern aesthetics with reliable Italian construction. Employing an ultra-slim profile, M heaters are a welcomed departure from traditional, more bulky designs. The M series is highlighted by its reflective...

The GH Series offers simple and easy installation with the use of included suction cups. With the highly visible temperature setting, the GH Series is easy to set and adjust to the desired temperature with the use of the Temperature Adjustment Knob...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

HYDROS Float Switch with Magnetic Mount The HYDROS Magnetic Float Switch Sensor is a simple yet effective water level sensor that can be added to any HYDROS Control with an available Sense Port. This Float Sensor can trigger actions such as Automatic...

Install Kit for Chillers 1/2"

The Finnex Compact Electronic Titanium Heaters maintain water temperature within +/-2ºF of the set value providing a safe, healthy and stable temperature for your tank. The titanium tubes are corrosion resistant which makes these virtually...

Jolly Preset Heaters have an Auto Shut Off feature that automatically turns the heater off when temperature is reached. JOLLY plastic heaters are designed for small freshwater, marine and turtles tanks. Their plastic casing makes them very durable...

The HYDROS DC CO2 Solenoid Valve is the ideal solution for controlling the CO2 flow on a calcium reactor or regulating CO2 injection into a freshwater planted tank. It’s a useful multi-purpose accessory you can use anywhere you need on/off...

Extend to your HYDROS Rope Leak Sense Port Accessory The HYDROS Rope Leak Detection Sensor is a flexible line that detects the presence of moisture anywhere along the rope. Can sense when freshwater or saltwater is underneath it and use that information...

This sensor plugs into your FMM and, using reflected infrared light, will signal your Apex when it changes state from being wet to dry or dry to wet. This sensor can be used for constructing your own ATO (auto-top-off), as a high-level warning sensor in...

M series heaters combine modern aesthetics with reliable Italian construction. Employing an ultra-slim profile, M heaters are a welcomed departure from traditional, more bulky designs. The M series is highlighted by its reflective...

No assembly requiredEasy installation (Clamp mounting bracket) Clamp mounting bracket can fit over aquarium walls up to 1/2" thickExtend Longevity of your lighting systemLow power consumptionAdjustable direction of air flowDimension: 8" x 6.5"x 1.6"Air...

This wall mount allows you to easily mount your aquarium controller board to a wall. Dimensions: 11"L x 1.125"W x 2.5"H

This wall mount allows you to easily mount your aquarium controller board to a wall. Dimensions: 11"L x 1.125"W x 2.5"H