pH

HI70300L is a storage solution prepared with reagent grade chemicals that can be used to ensure optimum performance of your pH and ORP electrodes. It is necessary to store a pH electrode in a solution in order to keep the glass membrane of the pH...

HI70010P is a premium quality pH 10.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers...

HI70007P is a premium quality pH 7.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have...

HI70004P is a premium quality pH 4.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have...

This is the perfect fluid for the storage of any pH or ORP/REDOX Electrode. American Marine Probe Storage Fluid will keep the tip properly moist and extend the life of your probe during storage (60 mL).

HI70300M is a storage solution prepared with reagent grade chemicals that can be used to ensure optimum performance of your pH and ORP electrodes. It is necessary to store a pH electrode in a solution in order to keep the glass membrane of the pH...

Raises and maintains pH at 8.3 in all saltwater aquariums Can be used safely in reef tanks Contains borate for added stability Contains magnesium to alleviate precipitation effects Marine Buffer® will safely raise marine pH to 8.3. It will...

This test kit is designed for both freshwater and saltwater aquariums, ponds, and turtle enclosures. The kit provides fast, easy, and accurate measurements. These kits include an easy to read color chart so that the results are clear...

pH/ORP electrode storage solution. To minimize clogging and ensure fast response time, always keep the glass bulb and the junction of your pH electrode moist. Store the electrode with a few drops of MA9015 storage solution in the protective cap.

PINPOINT® AC Adapter Kit (available in 110 VAC of 220 VAC) is optional to replace the 9-volt battery, which some monitor owners find convenient when monitoring full time. This AC Kit now contains special electronic filtering to avoid electrical...

If the pH is too low then the cause may be a too low alkalinity and/or insufficient aeration. A low pH can be corrected by improving aeration and by increasing the alkalinity to NSW (Natural seawater) value or upto approx 25% above NSW levels. The...

PH storage solution for HM Digital’s PH-200 / PH-80 as well as other brands of pH meters. Always make sure your sensor is kept in an electrode storage solution. If dry, refill the pH meter cap with the PH-STOR storage solution. The sponge should be...

Neptune Systems single-use pH calibration packets make calibrating your pH probe simple and fast. Just tear open the top, and a stick your probe into the solution when performing the calibration procedure.  Over the course of a couple months, it is...

Neptune Systems single-use pH calibration packets make calibrating your pH probe simple and fast. Just tear open the top, and a stick your probe into the solution when performing the calibration procedure.  Over the course of a couple months, it is...

High Range pH Test Kit The API® High Range pH Test Kit measures pH changes in marine aquariums, aquariums with African Cichlids, and very alkaline tap water. The API® High Range pH Test Kit reads the pH of water within the high range of 7.4...

Convienent Wide Range - 5.0 to 9.0 Works in Fresh and Saltwater Easy to Read Results About Fritz Liquid Test Kits - Wide Range pH Testing the pH of your aquarium water regularly to make proper adjustments is crucial to keep your...

pH Alert Product Description pH Alert is a unique color device designed to be placed in the aquarium or filter and monitor pH continuously. A sensor changes color reversibly to alert you shifts to in pH levels between 5.8 and 8.2. No tests, no strips,...

Neutral Regulator™ adjusts pH to neutral (pH 7.0) from either a low or high pH and maintains it there. It softens water by precipitating calcium and magnesium while removing any chlorine, chloramine, or ammonia. The use of Neutral Regulator™...

Reef Buffer™ will also raise carbonate alkalinity; however, it is intended primarily for use as a buffer in a reef system where the maintenance of a pH of 8.3 is often difficult. When pH is not an issue, Reef Builder™ or Reef Carbonate™...

Raises and maintains pH at 8.3 in all saltwater aquariums Can be used safely in reef tanks Contains borate for added stability Contains magnesium to alleviate precipitation effects Marine Buffer® will safely raise marine pH to 8.3. It will...

Neptune Systems single-use pH calibration packets make calibrating your probes simple and fast. Just tear open the top, and a stick your probe into the solution when performing the calibration procedure.  This kit contains One each of PH 7, PH 10,...

PINPOINT® High-Precision pH Calibration Fluids come in plastic envelope packets and are extremely accurate and field portable. Each packet contains ample fluid for calibration (about 30 ml). There is a free sample of these included with each...

PINPOINT® High-Precision pH Calibration Fluids come in plastic envelope packets and are extremely accurate and field portable. Each packet contains ample fluid for calibration (about 30 ml). There is a free sample of these included with each...

PINPOINT® High-Precision pH Calibration Fluids come in plastic envelope packets and are extremely accurate and field portable. Each packet contains ample fluid for calibration (about 30 ml). There is a free sample of these included with each...

HI70004P/H17007P/HI0010P are premium quality pH 4.01/7.01/10.01 calibration buffer solutions. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line...

PINPOINT® High-Precision pH Calibration Fluids come in plastic envelope packets and are extremely accurate and field portable. Each packet contains ample fluid for calibration (about 30 ml). There is a free sample of these included with each...

Neptune Systems single-use pH calibration packets make calibrating your pH probe simple and fast. Just tear open the top, and a stick your probe into the solution when performing the calibration procedure.  Over the course of a couple months, it is...

Neptune Systems single-use pH calibration packets make calibrating your pH probe simple and fast. Just tear open the top, and a stick your probe into the solution when performing the calibration procedure.  Over the course of a couple months, it is...

ONE Single 20 mL pack HI50021P is a premium quality calibration check solution used exclusively for the HI9813-6 portable pH/EC/TDS/Temp. meter. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring...

HI70010P is a premium quality pH 10.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers...

HI70007P is a premium quality pH 7.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have...

HI70004P is a premium quality pH 4.01 calibration buffer solution. Each sachet has the lot number and expiration date stamped on it and is made of light block foil ensuring freshness each time one is opened. Hanna’s line of calibration buffers have...