Thermocontrol-E (125 Watt) Aquarium Heater Kit - EHEIM Inkbird
Kit Includes: EHEIM Thermostat E Heater - Made in Germany, 3 Year Warranty, Run Dry Protection & INK BIRD Dual Aquarium Thermostat Temp Controller for Redundancy!
The obvious ideas are often the best. This also applies to the aquarium heating element. It is simply hung in the water and heats it up. The principle is the same as it was decades ago. But in the meantime the EHEIM controller heater has become an ultra-modern thermal device. The temperature can be set precisely and is measured even more precisely and kept more constant by the electronics. The coating made of special laboratory glass increases the heating surface, serves as a heat shield and ensures even heat emission. And whether you want to heat a 5 - 300 Gallon aquariums - you can choose from 10 sizes.
Advantages of the EHEIM control heater thermocontrol-e
- Made in Germany - Highest safety and reliability - 3 years warranty
- With dry-running protection (Thermo Safety Control)
- Precise temperature adjustment from 20 to 32 °C
- No readjustment necessary
- Control accuracy ± 0.5 °C
- The heat is kept constant
- Control lamp indicates the heating function (red: heating up; green: temperature reached)
- Fully submersible (waterproof)
- Glass coating increases the heating surface and ensures optimum, even heat output
- Suitable for fresh and marine water
- Model: Thermocontrole E125
- For aquariums: 39.6 - 52.8 gallons
- Dimensions: 12.2" x 1.4"
- Power consumption: 125 W / 230 V
- Min to Max Temperature: 68° - 90°F
- Power Cable: 5.5 feet
INK BIRD Pre-wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquariums.
ITC-306T is a pre-wired heating output temperature controller with time function specifically for aquariums. It can be set to two different temperatures with its function of dual time cycle setting during 24 hours according to the day and night, which can more suitable for the physiological needs of animals and plants. ITC-306T can be widely use in over-heat protection and automatic temperature control system of all sorts of electrical equipment for aquariums.
This plug and play product is designed with dual LCD display, and offers the optional display of Centigrade or Fahrenheit, which makes it more humanized temperature control. With large power output 1,200W, it’s suitable for most applications. And the temperature can be controlled more accurately with its function of temperature calibration and temperature hysteresis.
- Temperature Control Mode :On/Off Control, Heating
- Temperature Control Range : -50~99 °C / -58~210 ° F
- Temperature Resolution: 0.1 ° C / 0.1° F
- Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
- Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Buzzer Alarm: Over Temperature Alarm
Relay Contact Capacity: Heating (10A, 100-240VAC)
Dimension Body: 140x68x33mm (5.5" x 2.7" x 1.3")
Input Power: 100 ~240VAC, 50Hz/60Hz