Control

HYDROS Float Switch with Magnetic Mount Requires a HYDROS System to operate The HYDROS Magnetic Float Switch Sensor is a simple yet effective water level sensor that can be added to any HYDROS Control with an available Sense Port. This Float Sensor can...

The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from saltwater damage.  Virtually unbreakable, especially in comparison with the standard glass aquarium, these tube are built to last.  The ultra heating...

The HYDROS WiFi Smart Plug is a smart power outlet designed to work with the CoralVue HYDROS platform. The Smart Plug has a 1 x 100-250V AC outlet that is WiFi controllable using the free HYDROS app for Android and iOS/Apple mobile devices. You can...

This Kit was designed for current Reefer Owners.  It does not include the Magnetic ATO Sensor Mounting Bracket. The ReefATO+ is an exceptionally reliable auto top-off system that includes a highly accurate temperature monitor plus an...

Generic Digital Thermometer with Probe, displays in both F and C.

10 pack of installation clips for the HYDROS Rope Leak Detector Easily and securely mount the flexible HYDROS Rope Leak Detection Sensor to most surfaces to better sense the presence of moisture anywhere along the rope. 

The A3 Jr is a Monitoring Only solution.  You can not turn anything on or off with it straight out of the box.  It becomes a full controller however as soon as you add a Powerbar.  To make it a full controller just buy an Energy Bar...

The HYDROS Flow Sensors are easy-to-install and measure the flow rate of water passing through it using the HYDROS app. Available in four sizes: 3/4in (40-800gph), 1in (50-1500gph), 1.5in (100-2500gph), 2in (9200-4050gph) The HYDROS Flow...

Direct Pump Driver - For 10V Quad WE pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

AQUABUS EXTENSION CABLE (M/F)-VARIOUS LENGTHS The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to extend a M/M Aquabus Cable. Remember,...

The all new Cobalt Aquatics NEO-Therm fully submersible electronic heaters feature a modern, super flat design with an easy to set “one touch” control system. The advanced electronic thermostat is accurate to ±0.5ºF and includes a...

The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from saltwater damage.  Virtually unbreakable, especially in comparison with the standard glass aquarium, these tube are built to last.  The ultra heating...

We have been on the hunt for a reliable heating element that solves a lot of the issues we currently have with other heaters in the hobby. We have always had issues with heaters that have built-in controllers and segregating the controller out from the...

The HYDROS Control 2 Starter Pack is the first affordable and easy-to-use aquarium controller kit in the aquatic industry. This starter pack includes all essential equipment needed to monitor and control a healthy aquarium including a...

The Reef Breeders Exo-ATO (External ATO) is one of the first ATO systems to contain all electronics outside of your aquarium. The controller and sensor mount to the outside of the glass, and a small magnetic ring is inserted at your desired water level...

DŌS QuietDrive - Dose. Automate. Protect. New QuietZone Modes for Reduced Noise New Continuous Duty Modes Same Reliable DŌS Hardware Compatible with A2 and A3 Series Apex Controllers In the most important ways, this is still the same Neptune...

The HYDROS WaveEngine v2 can control, monitor, and even supply power to a variety of different aquarium pumps. Now you can use pumps from different brands together using a single, integrated flow management system. Control and monitor pumps...

Kit Includes: 2x - EHEIM Thermostat E Heater - Made in Germany, 3 Year Warranty, Run Dry Protection & INK BIRD Dual Aquarium Thermostat Temp Controller for Redundancy! The obvious ideas are often the best. This also applies to the aquarium heating...

The Turbelle® High Jet is a replacement dosing pump with safety extra low voltage 12 V DC for Osmolator® nano 3152 and Osmolator® 3155 and belongs to a new generation of centrifugal pumps with a high delivery height and small...

Requires a HYDROS System to operate The HYDROS Leak Detection Sensor is a solid surface leak detector that can sense when freshwater or saltwater is underneath it and use that information to protect your aquarium, home, or office from total...

Usually used with a return pump, this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor itself uses British Standard Parallel Pipe...

BUBBLE MAGUS SEASIDE AQUATICS MAGNETIC AQUARIUM QUAD (4) PROBE HOLDERHolder can fit up to four probes. It’s design to hold ph, ORP, salinity and/or temp probe.It has a magnet on the back and can be easily install on the sump wall, baffle divider or...

Made in Germany, 3 Year Warranty, Run Dry Protection! The obvious ideas are often the best. This also applies to the aquarium heating element. It is simply hung in the water and heats it up. The principle is the same as it was decades ago. But in the...

The all new Cobalt Aquatics NEO-Therm fully submersible electronic heaters feature a modern, super flat design with an easy to set “one touch” control system. The advanced electronic thermostat is accurate to ±0.5ºF and includes a...

Made in Germany, 3 Year Warranty, Run Dry Protection! The obvious ideas are often the best. This also applies to the aquarium heating element. It is simply hung in the water and heats it up. The principle is the same as it was decades ago. But in the...

For use with your top off or dosing pump1.5L - over all 12.40" tall by 3.80" diameter*** Caution ***Red Sea's NO3:PO4X chemical will crack and damage the containers, this product is not to be use with our containers.

The WaveEngine LE allows you to easily add different brand pumps to your aquarium to obtain the ultimate flow. Specify the minimum and maximum speed each pump can run while working together in multiple flow presets such as sync, anti-sync, triangle wave,...

Replacement syringe & needle kit for the Mastertronic The set includes: 4 Plastic syringes (without needles) 6 Replacement needles

Highly precise and stabilized reagent solution for KH Director. Available in 500 ml and 1000 ml bottles.

HYDROS Control 2 is a small, general-purpose aquarium controller capable of managing and controlling all the main functions of an aquarium. Set up is quick and easy, making this ideal for both beginner and advanced hobbyists. Monitor...

Mount your Vortech Pump Controller in style.

This kit was created to be used in conjunction with Neptune Systems salinity/conductivity probe.  It allows the probe to stay clean and fixes a well know issue with the salinity probe.  Microbubbles no more.  Kit Includes: Salinity...

We have been on the hunt for a reliable heating element that solves a lot of the issues we currently have with other heaters in the hobby. We have always had issues with heaters that have built-in controllers and segregating the controller out from the...

Innovative heater range equipped with PATENTED "contactless" temperature electronic control.  The easiest and most immediate way to set the temperature of the heater, just hold the Sicce ContrAll App to the...

The IceCap Gyre is back and better than ever! The all-new IceCap 4K Gyre Flow Pump is more powerful than its 3K predecessor.  Gyre 4K Pump Features & Benefits Unique Gyre Flow: Virtually Eliminates Dead Spots Evenly Distributed Linear...

The HYDROS Flow Sensors are easy-to-install and measure the flow rate of water passing through it using the HYDROS app. Available in four sizes: 3/4in (40-800gph), 1in (50-1500gph), 1.5in (100-2500gph), 2in (9200-4050gph) The HYDROS Flow...

Kit Includes: EHEIM Thermostat E Heater - Made in Germany, 3 Year Warranty, Run Dry Protection & INK BIRD Dual Aquarium Thermostat Temp Controller for Redundancy! The obvious ideas are often the best. This also applies to the aquarium heating...

This wall mount allows you to easily mount your aquarium controller board to a wall. Dimensions: 11"L x 1.125"W x 2.5"H

Introducing the Custom Cradle XL This is the XL Version - 4 probe holder A magnetically mounted, multifunction probe holder that organizes your devices in the most simple and efficient way possible. Other probes racks can lead to an unorganized...

Monitoring the salinity, pH and temperature of the water is an important routine in the maintenance of a marine aquarium or marine aquaculture. The Hann HI981520 is an easy-to-use monitor that continuously monitors and displays salinity (via...