Replacement Parts

Replacement Filter Kit Includes: Spectrapure High Capacity Silica Buster DI Filter Cartridge 10"  Spectrapure High Capacity Maxcap Super DI Filter Cartridge 10"  Spectrapure RODI Carbon Filter 0.5 Micron Standard Spectrapure RODI Sediment...

Prevent floods by adding the super-easy-to-install Flood Guardian to your RO or RO/DI System. Never worry about forgetting to turn off your RO/DI system or overfilling your reservoir again! Simply mount the magnetically-mounted sensor to any...

Eshopps’ Float Valve offers a simple solution to help maintain proper water level.Use the Eshopps’ Float Valve as part of an automatic top-off system you create to replenish aquarium water lost through evaporation. Adjustable acrylic mounting...

The DM-1 is consumer friendly monitor measuring feed (input) water vs. product (output) water of a water filtration system at any time. This device is ideal for Reverse Osmosis (RO), Deionized water (DI) filtration systems that work well in variety of...

Add-on Booster Pump Kit for all 60, 90 and 180 GPD RODI SYSTEMS The Aquatec Booster pump has 3/8" ports and it comes with 3/8" to 1/4" stem's to reduce the size to standard 1/4 RO tubing. Includes Pump, Fittings, 3 ft Controller Cable, Pressure...

Float valves are used to shut off RODI water when a certian level is reached.

IceCap Magnetic Mount Float Valve comes with universal tubing retainer and tubing

The TDS-4TMA handheld meter is ideal for testing TDS and salt levels of freshwater aquariums and ponds. It can also be used for testing water filtration and purification systems, such as RO and DI, to know when to changes filters and membranes...

C-342: TDS and EC Calibration Solutions For optimal performance, re-calibrate your meters periodically or if testing TDS or conductivity levels in wide or different ranges. FEATURES: NaCl calibration solution, available in 342 ppm Comes in...

Standard replacement RODI filter holder for RO Systems.  Perfect for replacing cracked filter holders due to freezing, etc. Replacement housing for RO system Standard size for all RO systems using 10" filters 1/4" threaded in and out...

Automatic Shut-Off Float Kit w/ ASO Valve, Float Vae and 1/4in Fittings FEATURES: For use with RO and RODI System - Positive shut-off; completely shuts off all wastand product water Note: Auto Shut-Off Float Kit is not recommended for evaporation...

Everything you need to connect and maintain your standard size 10" RO system - If purchased separately over $40! Pack includes: (1) 1/4" Poly Tubing Cutter (1) Roll Teflon Pipe Thread Tape (1) RO Pressure Gauge w/Press-Fit Tee Connectors (1) RO...

Pressure Gauge Kit w/ 1-1/2in dia 0-160psi gauge and 1/4inch Fittings

Ideal replacement for DI Resin, Carbon, and other media used for the water purification process. Fits standard 10" cartridge housing - Designed for upflow applications to ensure the longest possible exposure time. Twist-On Cap with Sponge to prevent...

Are you tired of big, boxy, hard-to-read TDS meters? So are we! That’s why we built the AutoAqua Titanium Series TDS meters. They are small, easy-to-use, and have a big bright screen to make checking your TDS fast and easy. The Titanium S3 also...

The TRM-1 is a unique monitor offering the user 3 points of contact during the filtration process. This TDS monitor allows for checking TDS levels at 3 points, such as with DI/RO (deionization / reverse osmosis), or multiple points in an RO system, and...

These switches, typically mounted near a RODI water holding tank, automatically control the system pump and/or solenoid valve as required. The switches are normally closed and can be pre-set at various shut-off pressures. Pump is re-activated at 15 p

Water Saving Upgrade Kits are probably the most recommended RODI upgrade. If you have proper pressure (65+ PSI) we highly recommend installing the kit, because it will produce water twice as fast as a standard 75 GPD or 100 GPD membrane while cutting the...

The TRM-1 is a three-sensor TDS monitor that can monitor the TDS levels at three different points. It is perfect for RO/DI systems and other types of filtration and purification systems. Features Displays TDS levels of the three sensing points with...

Provides reliable inlet pressure for efficient membrane utilization.  These pumps are capable of continuous duty and are effective for recirculation based applications as well. They are ideally suited to work with RODI water systems but are...

Are you tired of big, boxy, hard-to-read TDS meters? So are we! That’s why we built the AutoAqua Titanium Series TDS meters. They are small, easy-to-use, and have a big bright screen to make checking your TDS fast and easy. With a single push of a...

Are you tired of big, boxy, hard-to-read TDS meters? So are we! That’s why we built the AutoAqua Titanium Series TDS meters. They are small, easy-to-use, and have a big bright screen to make checking your TDS fast and easy. The Titanium S1 also...

Are you tired of big, boxy, hard-to-read TDS meters? So are we! That’s why we built the AutoAqua Titanium Series TDS meters. They are small, easy-to-use, and have a big bright screen to make checking your TDS fast and easy. The Titanium S2 also...

TUNZE RO Water Controller 8555 is an automatic water level controller used in the collection container of RO station. The controller is also suitable for other water tanks or can be connected to an automatic refill system. It consists of a controller,...

Power Supply for the Aquatec 8800 RODI Booster Pumps   120 Volt

This 20 Micron Washable Add On Sediment is for use in front of your Reverse Osmosis unit ( or can be used alone).  Commonly used for heavy sediment loading in the 1 micron pre-filter.  When...

Add On Standard 10"x2" inch DI Stage. This Add On DI can be used with most RO units or used alone. The unit come filled with: Nuclear grade, virgin, color indicating Deionization resin. A mounting Bracket 4 feet of tubing

SMART & SIMPLE The touch controller shows the operation status. Built-in QST (Quick Security Technology) provides real-time failsafe protection against failure. There’s no technical jargon or complex menu system. It features Audible...

Mur-lok® Fittings - Reducers - Black Features: Leak Resistant Dual EPDM O-rings UV and Chemical Resistant Polypropylene NSF Standard 58 Certified 304 Stainless Steel Gripping Teeth 150 p.s.i. @ 70ºF (10 Bar @ 20ºC) 60 p.s.i. @...

Add On Standard Size DOULBE 10"x2" inch DI Filter. This Add On DI can be used with most RO units or used alone. The unit come filled with: TWO - Nuclear grade, virgin, color indicating Deionization resin. A mounting...

Excellent for Reverse Osmosis systems Up to 100 GPD  Fixes Low-Pressure Problems Increased Output & Improves RO Waste-to-Product Water Ratio Adjustable Pressure to Maximize Efficiency Rubber Feet to Minimize Vibration and...

A Standard Carbon block works well to remove chlorine, however, more and more municipalities are mixing ammonia with chlorine; this combination is known as Chloramine.   The standard carbon block will strip the chlorine...

SpectraPure® Piggy Back Kit with 90 GPD Standard RO Membrane -PBK-90

The smart way to REDUCE WASTE WATER, DECREASE RESIN CONSUMPTION and EXTEND MEMBRANE LIFE! YOUR Water MADE Better - Increase the effectiveness of your RO system, and REDUCE waste water by up to 65%! Reverse osmosis booster pumps are used to increase the...

The smart way to REDUCE WASTE WATER, DECREASE RESIN CONSUMPTION and EXTEND MEMBRANE LIFE! YOUR Water MADE Better - Increase the effectiveness of your RO system, and REDUCE waste water by up to 65%! Reverse osmosis booster pumps are used to...