HYDROS by Coralvue

Terminates the Hydros Collective

This 1 foot long HYDROS System Command Bus Cable allows HYDROS devices to communicate and even provide power to the Control 2 and Control 4.

This 6 foott long HYDROS System Command Bus Cable allows HYDROS devices to communicate and even provide power to the Control 2 and Control 4.

Requires a HYDROS System to operate The HYDROS Water Level Sensor is an optical sensor you can use for a variety of aquarium applications, such as sensing when your tank needs to be topped off or to detect when a dosing container needs a refill. It...

The HYDROS Power 4 WiFi Power Strip is an intelligent power bar designed to work with the CoralVue HYDROS platform. (It requires the HYDROS app, and the HYDROS control unit is NOT included.) The Power 4 has 4 x 120V AC outlets and 4 x USB ports that are...

Requires a Hydros to Control the Unit The HYDROS Dosing Pump is a simple and affordable way to automate the addition of liquid supplements, trace elements, and two-part solutions to an aquarium. Connect the Dosing Pump to any available HYDROS Control...

Why purchase a separate and expensive auto top-off system when HYDROS can do the job for you? The HYDROS Auto Top-Off Kit comes with everything you need to use your HYDROS device (like the Control X2 or Control X4) as...

This HYDROS Force Port Adapter Cable (72 inches long) is designed to directly connect the Kraken to power popular 24V aquarium equipment. The eight available orange 24V Force Ports on the Kraken can power DC pumps, lights, or any device where the power...

Requires a HYDROS System to operate The HYDROS Temperature Sensor is an easy and affordable way to prevent your aquarium water from becoming too cold or too hot. It monitors the water temperature in your aquarium so you can keep it within the safe...

This HYDROS Drive Port Cable (72 inches long) is designed to connect to an available Drive port on a Kraken, X2, X4, XD, or other HYDROS Control directly to power small 12V devices such as ATO pumps, cabinet LED lights, fans, solenoids, and steering...

Requires a HYDROS System to operate With a HYDROS DC Micro Pump and a HYDROS Optical Water Level Sensor (or Float Sensor), you can use the HYDROS Control 2 and Control 4 as an auto top-off (ATO) system. Just plug the pump into a...

Direct Pump Driver - For IceCap Gyre WE pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

Requires a HYDROS System to operate Protect your aquarium, home, or office from total disaster The HYDROS Rope Leak Detection Sensor is a flexible line that detects the presence of moisture anywhere along the rope. Kit Includes: Leak...

Requires a HYDROS System to operate The HYDROS Skimmer Sensor serves a very specific and important role: it prevents your protein skimmer from overflowing onto the floor or back into your sump. The way it works is easy: just place the sensor inside...

Direct Pump Driver - For Reef Octopus Varios / Pulse WE pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

This 9ft long extension cable for HYDROS Sense Accessories for Control 2 and Control 4.

This 9ft long extension cable for HYDROS Drive Accessories for Control 2 and Control 4.

3 Water Level Sensors for Added Redundancy Requires a HYDROS System to operate The HYDROS Triple Optical Water Level Sensor can be used for a variety of aquarium applications, such as sensing when your tank needs to be topped off or detecting when a...

Direct Pump Driver - For Maxspect Gyre 330/350 WE Pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

Requires a HYDROS System to operate The HYDROS DC Solenoid Valve is a handy HYDROS Control 2 and Control 4 accessory that provides easy on/off RO or RO/DI water flow. You can connect the solenoid to your reverse osmosis filter...

Direct Pump Driver - For 10V Quad WE pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps. Also used to connect Ind Aquatics Frozen Fish Food Feeder to Hydros.

This HDYROS Force Port Power Cable is used to connect the Kraken to power a WaveEngine LE, WaveEngine, XD, or Control X10. This 6ft cable has two 4-pin GX12-4 fittings. One end attaches to any of the 8 Force Ports on the Kraken and the other end to the...

Requires a HYDROS System to operate The HYDROS Leak Detection Sensor is a solid surface leak detector that can sense when freshwater or saltwater is underneath it and use that information to protect your aquarium, home, or office from total...

The HYDROS Flow Sensors are easy-to-install and measure the flow rate of water passing through it using the HYDROS app. Available in four sizes: 3/4in (40-800gph), 1in (50-1500gph), 1.5in (100-2500gph), 2in (9200-4050gph) The HYDROS Flow...

HYDROS Float Switch with Magnetic Mount Requires a HYDROS System to operate The HYDROS Magnetic Float Switch Sensor is a simple yet effective water level sensor that can be added to any HYDROS Control with an available Sense Port. This Float Sensor can...

Requires a HYDROS System to operate The HYDROS Slim Temperature Sensor Probe is only 1.6” long and 0.32” wide. It’s all-black solid waterproof IP68 construction is built for years of reliable service. It is a “set...

Direct Pump Driver - For TUNZE 0-10V pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

The HYDROS Flow Sensors are easy-to-install and measure the flow rate of water passing through it using the HYDROS app. Available in four sizes: 3/4in (40-800gph), 1in (50-1500gph), 1.5in (100-2500gph), 2in (9200-4050gph) The HYDROS Flow...

10 pack of installation clips for the HYDROS Rope Leak Detector Easily and securely mount the flexible HYDROS Rope Leak Detection Sensor to most surfaces to better sense the presence of moisture anywhere along the rope. 

The IceCap Gyre is back and better than ever! The all-new IceCap 2K Gyre Flow Pump is more powerful than its 1K predecessor. Gyre 2K Pump Features & Benefits Unique Gyre Flow: Virtually Eliminates Dead Spots Evenly Distributed Linear...

This 14 foot long HYDROS System Command Bus Cable allows HYDROS devices to communicate and even provide power to the Control 2 and Control 4.

Extend to your HYDROS Rope Leak Sense Port Accessory The HYDROS Rope Leak Detection Sensor is a flexible line that detects the presence of moisture anywhere along the rope. Can sense when freshwater or saltwater is underneath it and use that information...

Monitor your RO/DI units' water quality with HYDROS Dual Inline TDS Sensor. Plugs directly into any HYDROS Control with an available Sense Port and does not require any additional power source. The HYDROS Digital Inline TDS Meter has two sensors to...

Requires a HYDROS System to operate The HYDROS 2mL/min Dosing Pump is a simple and affordable dosing pump perfect for automating the addition of liquid supplements, trace elements, and two-part solutions to an aquarium. Connect the power of the Dosing...

HYDROS Rope Leak Sensor Cable ONLY. Part of set

Requires a HYDROS System to operate The HYDROS DC CO2 Solenoid Valve is the ideal solution for controlling the CO2 flow on a calcium reactor or regulating CO2 injection into a freshwater planted tank. It’s a useful multi-purpose accessory you...

Seamlessly integrate any aquarium controller or monitor into your cabinet and keep things organized with this adjustable mounting system. The system features an adjustable mounting plate with hinge, allowing you to position it for the best viewing angle,...

WYZE Cam v4, 2.5K HD WiFi Smart Home Security Camera, Indoor/Outdoor, Pet/Baby Monitor, Motion Activated Spotlight/Siren, Color Night Vision, 2-Way Audio, Works with Alexa & Google, Wired, Grey Pair this with your AvidAqua ModMag System for perfect...

WYZE Cam v4, 2.5K HD WiFi Smart Home Security Camera, Indoor/Outdoor, Pet/Baby Monitor, Motion Activated Spotlight/Siren, Color Night Vision, 2-Way Audio, Works with Alexa & Google, Wired, Grey Pair this with your AvidAqua ModMag System for perfect...

Direct Pump Driver - For Maxspect Gyre 150/250/280 WE pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.