Apex Gear

DŌS Replacement Pump Head Cap for your Neptune Systems DŌS module.  Complete assembly includes cover, peri-tube, fittings and roller wheel. Neptune Systems recommends that these be replaced approximately every 700 hours of pump run time.

Feed your fish consistently, and safely, while you are home OR away! NOT A STAND-ALONE FEEDER (MUST BE USED WITH AN APEX SYSTEM) A key component of caring for aquatic animals is regularly providing them with food, but in amounts that get consumed...

The Trident is an automated testing system that regularly tests alkalinity, calcium, and magnesium in your saltwater aquarium — and then communicates this information to your Apex so you can get alerts, and change your dosing. When combined with...

The PMUP is a multi-purpose pump that can be used for many different tasks on your aquarium. Automatic Top-Off (ATO) Carbon reactors GFO reactors Biopellet reactors Many other salt or freshwater uses NEW IN VERSION 2: Automatic shut off when...

This Energy Bar 832 was redesigned from the ground up.  Not only does it have eight 120V AC outlets, but it includes an internal 100W 24VDC power supply as well. That power supply feeds three built-in 1LINK ports as well as two 24VDC accessory ports...

4-pin male to male cable many of you have been waiting for. It is ten feet long. This cable allows you to connect your DŌS to the 1LINK thereby eliminating the need for the DŌS to be connected to a power supply brick or the AquaBus cable. Just one wire!...

The ATK (Automatic Top-off Kit) is a simple, standalone, and complete solution for replacing water lost to evaporation. The new aquarium hobbyist has many challenges, but none is more annoying than the chore of adding water, every day, to make up for...

DŌS QuietDrive - Dose. Automate. Protect. New QuietZone Modes for Reduced Noise New Continuous Duty Modes Same Reliable DŌS Hardware Compatible with A2 and A3 Series Apex Controllers In the most important ways, this is still the same Neptune...

COR 20 - This pump is identical in physical size to the COR 15 but with the addition of an External power supply can push over 2000gph! All that flow for less than 100w of power and it is nearly silent. After deciding to do this larger, higher flow...

The 1LINK module and the EB832 have two DC24 accessory outputs built that act like additional on/off outlets for DC24 devices. There are some Neptune Systems accessories, like our PMUP, that connect to these outputs directly.  There are...

Some of the most successful reef aquariums employ the use of a macroalgae-filled growth area or refugium for the purpose of nutrient control. The GRO is a specialized, 20W LED light designed to grow many types of common macroalgaes (i.e. Chaetomorpha)...

This cable connects to the 24VDC accessory connections on the 1LINK. This cable has two bare (tinned) wires on the other end so you could connect it up to a 24VDC device of your choosing so long as it draws no more than 35W. Examples might include a...

The PMUP is a multi-purpose pump that can be used for many different tasks on your aquarium.  This listing includes a Power Supply. Automatic Top-Off (ATO) Carbon reactors GFO reactors Biopellet reactors Many other salt or freshwater...

Kit Includes 1x FMM Module, 2x Solid Surface Leak Detection Probe. Aquarium leaks are one of the most feared events for even the most seasoned aquarist – and for good reason. When it comes to leaks, it’s not just about whether you’ll...

COR 15 - This submersible pump (that can also be run externally) now has its own external control box but still only requires you connect it up one place - 1Link. With less than 50w of power it is pushing 1500gph and more importantly at 6' of head...

The Fluid Monitoring Kit Includes: 1x - FMM Fluid Monitoring Module 1x - 1" Flow Sensor (FS-100) 2x - 1/2" Flow Sensor (FS-50) 2x - 1" Unions 4x - 1/2" Adapters FMK What's In The Box? The FMM (Fluid Monitoring Module) is a multi-purpose...

This attractive fluid containment system stores your dosing fluids in style and even tells you when it’s time to refill! Each side stores two liters (2L) of fluid Connects directly to your DŌS Optical sensors inform your APEX when...

Trident NP Nitrate & Phosphate Tester WITHOUT REAGENTS Reagents Store Neatly Inside the Trident Test Nitrate and Phosphate Automatically Once Per Day Compatible with A3 Apex (Apex Pro, Apex, Apex Jr.) or A2 Apex (Apex, Apex EL) Designed and...

1LINK is the marrying of the Aquabus communication standard, along with the power wires to drive higher power devices, all in one single cable.  One of the benefits of this is to avoid the need for a DC power brick for every 24V device in your...

Some of the most successful reef aquariums employ the use of a macroalgae-filled growth area or refugium for the purpose of nutrient control. The GRO is a specialized, 20W LED light designed to grow many types of common macroalgaes (i.e. Chaetomorpha)...

The EB832 Mounting Bracket from Neptune Systems provides a durable and practical solution for securely mounting the EB832 Energy Bar.

Trident NP Nitrate & Phosphate Tester w/ 2 Month Reagent Kit Do to the nature of the chemicals used in the reagents, all orders that include Trident NP reagents must ship ground only.   These NP Reagents CANNOT ship outside the contiguous...

Replacement motor block for the COR-20 and COR-15

COR-20 Replacement Driver Driver for the Neptune Systems COR-20 pump. Does not include a power supply.

If you have simply lost, broken, or want a spare, we carry a wide range of Neptune Systems replacement parts. Compatible with 1Link Module, COR-15 Return Pump, and COR-20 Return Pump. Specifications: Input - 100-240V ~ 2.5A Output - 24V 5A What's...

COR-15 Replacement Driver Driver for the Neptune Systems COR-15 pump. Requires an available 1LINK port.

Debuting at RAP California 2025 - Come See the Saltwater Team.  More Details to Follow - Subscribe to Our Youtube Channel!