Control

Trident Reagent Kit 6 Month Supply - With six month kits, the cost of running the Trident is less than $17 per month - that’s averages out to about 7 cents a test! Neptune Systems recommends keeping on hand no more Trident reagent than you might...

PLEASE ONLY PURCHASE 1x Two Month Supply.  We will not be able to restock any reagents for the next 30 days. 2-month reagent kit (based on the default testing schedule of 4-Alk/2-Ca/2-Mg per day).  The reagent kit has at least 240...

Dueto the nature of the chemicals used in the reagents, all orders that include Trident NP reagents must ship ground only.   These NP Reagents CANNOT ship outside the contiguous 48 US States due to the ground restrictions. Replacement Reagent...

The Crossover Diet from Neptune Systems is a new type of food that was designed specifically for coral reef tanks and specifically for automatic feeding systems. Working closely with Reed Mariculture (the manufacturer of Reef Nutrition foods) we came up...

Replace your Temperature Probe, add one for another tank, or put one on your PM2/PM3 module for temperature compensated readings. Buy this probe if you are: Replacing an old probe. Adding another tank to your system via a PM1. Want to have more...

Terminates the Hydros Collective

DŌS Replacement Pump Head Cap for your Neptune Systems DŌS module.  Complete assembly includes cover, peri-tube, fittings and roller wheel. Neptune Systems recommends that these be replaced approximately every 700 hours of pump run time.

This 1 foot long HYDROS System Command Bus Cable allows HYDROS devices to communicate and even provide power to the Control 2 and Control 4.

The Magnetic Optical Sensor replaces our optical sensor with magnet and offers an improved look, feel, and magnetic design that also lends itself to help prevent water incursion into the sensor. This sensor plugs into your FMM and, using reflected...

With huge features jammed in a tiny package, the Duetto2 is the perfect ATO for your aquarium. XPAqua’s proprietary dual-optical sensor packs two precise level sensors in one incredibly small package. In addition to keeping your water level...

Neptune Systems Magnetic Probe Rack Features – MPR: Organizes up to four probes. Designed specifically for the Apex Controller probes, a perfect fit for the thicker temp probes. Built with an all acrylic weather and shatter resistant design...

Feed your fish consistently, and safely, while you are home OR away! NOT A STAND-ALONE FEEDER (MUST BE USED WITH AN APEX SYSTEM) A key component of caring for aquatic animals is regularly providing them with food, but in amounts that get consumed...

This 6 foott long HYDROS System Command Bus Cable allows HYDROS devices to communicate and even provide power to the Control 2 and Control 4.

Requires a HYDROS System to operate The HYDROS Water Level Sensor is an optical sensor you can use for a variety of aquarium applications, such as sensing when your tank needs to be topped off or to detect when a dosing container needs a refill. It...

The PMUP is a multi-purpose pump that can be used for many different tasks on your aquarium. Automatic Top-Off (ATO) Carbon reactors GFO reactors Biopellet reactors Many other salt or freshwater uses NEW IN VERSION 2: Automatic shut off when...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

4-pin male to male cable many of you have been waiting for. It is ten feet long. This cable allows you to connect your DŌS to the 1LINK thereby eliminating the need for the DŌS to be connected to a power supply brick or the AquaBus cable. Just one wire!...

Requires a Hydros to Control the Unit The HYDROS Dosing Pump is a simple and affordable way to automate the addition of liquid supplements, trace elements, and two-part solutions to an aquarium. Connect the Dosing Pump to any available HYDROS Control...

This sensor plugs into your FMM and, using reflected infrared light, will signal your Apex when it changes state from being wet to dry or dry to wet. This sensor can be used for constructing your own ATO (auto-top-off), as a high-level warning sensor in...

This 24VDC powered, normally-closed (NC), solenoid valve has push-fit tubing input and outputs designed for standard 1/4″ tubing. The electrical connection on this solenoid valve fits the DC24 accessory ports found on the FMM, 1Link, and Energy Bar...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

Pre-wired Electronic Heating Thermostat Temperature Controller and Digital Timer Controller for Aquariums, now with WIFI control. ITC-306T WIFI is a pre-wired heating output temperature controller with time function specifically for aquariums. It can be...

Start measuring salinity in your tank and get alerts when out of range. Buy this probe if you are: Replacing an old probe. Adding salinity monitoring to your system via a PM2.

FMM – FLUID MONITORING MODULE IT DOES SO MUCH! This is just the module itself without and sensors. The FMM (Fluid Monitoring Module) is a module that connects to any Apex (Apex(2016), Apex Classic, Apex Lite, Apex Jr.) via it’s AquaBus...

Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second...

Why purchase a separate and expensive auto top-off system when HYDROS can do the job for you? The HYDROS Auto Top-Off Kit comes with everything you need to use your HYDROS device (like the Control X2 or Control X4) as...

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

This HYDROS Force Port Adapter Cable (72 inches long) is designed to directly connect the Kraken to power popular 24V aquarium equipment. The eight available orange 24V Force Ports on the Kraken can power DC pumps, lights, or any device where the power...

Straightforward and safe water level controller for fresh and sea water with optical control sensor and independent thermal safety sensor. A constant water level keeps the salt concentration constant in seawater aquariums. Incl. Turbelle® High...

We have been on the hunt for a reliable heating element that solves a lot of the issues we currently have with other heaters in the hobby. We have always had issues with heaters that have built-in controllers and segregating the controller out from the...

This Heating Element Required a Heating Controller to Operate! - https://www.saltwateraquarium.com/hc-810m-digital-temperature-controller-up-to-800-watts-finnex/ The Titanium Finnex Heaters are corrosion-resistant, extending the life exponentially from...

Requires a HYDROS System to operate The HYDROS Temperature Sensor is an easy and affordable way to prevent your aquarium water from becoming too cold or too hot. It monitors the water temperature in your aquarium so you can keep it within the safe...

We have been on the hunt for a reliable heating element that solves a lot of the issues we currently have with other heaters in the hobby. We have always had issues with heaters that have built-in controllers and segregating the controller out from the...

This HYDROS Drive Port Cable (72 inches long) is designed to connect to an available Drive port on a Kraken, X2, X4, XD, or other HYDROS Control directly to power small 12V devices such as ATO pumps, cabinet LED lights, fans, solenoids, and steering...

The ReefATO+ sensor requires the electrical conductivity levels that are typical for seawater to work properly and therefore this system will not work for freshwater systems. The ReefATO+ is an exceptionally reliable auto top-off system that includes a...

The Red Sea ReefCan is an Auto Top Off reservoir designed to either fit in the cabinet alongside a sump or failing that, at the side of the cabinet on the outside. It will come in two sizes, a 40 liter/10.6-gallon volume, and an 18 liter/4.8 gallon,...

With the Fauna Marin Multi-Reference Solution, you can test your test kits under accurate conditions. Our Reference Solution is the first to be based on a saltwater matrix and is quality tested using our ICP-AES testing machine. We use a saltwater matrix...

The PM1 probe module is just what you need if you want to monitor pH or ORP in your tank. And, there is an added bonus, you get an extra temperature port as well as six I/O switch inputs for use on ATO, feed buttons, or whatever else you may come up...

Lab Grade Salinity/Conductivity Probe Kit Keep track of the salinity in your marine aquarium with the CoralVue HYDROS Salinity Kit. This kit includes the necessary 28ppt and 35ppt calibration solutions to ensure precise conductivity...