Control

With the EHEIM precision heater your fish receive exactly the right temperature – in any aquarium. Obvious ideas often are the best ones. For example, the aquarium heater as a rod. The heating rod is simply hung in the water and heats it. It is...

Are your corals not as vibrant as you expect? Have you ever had an aquarium crash unexpectedly? Now with the seneye Reef you can continuously monitor and analyze key life-critical parameters in your saltwater aquarium to ensure that your corals and fish...

This HDYROS Force Port Power Cable is used to connect the Kraken to power a WaveEngine LE, WaveEngine, XD, or Control X10. This 6ft cable has two 4-pin GX12-4 fittings. One end attaches to any of the 8 Force Ports on the Kraken and the other end to the...

Requires a HYDROS System to operate The HYDROS Leak Detection Sensor is a solid surface leak detector that can sense when freshwater or saltwater is underneath it and use that information to protect your aquarium, home, or office from total...

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

This cable connects to the 24VDC accessory connections on the 1LINK. This cable has two bare (tinned) wires on the other end so you could connect it up to a 24VDC device of your choosing so long as it draws no more than 35W. Examples might include a...

110V power supply for our DC24 accessories like the PMUP, GRO Refugium LED and Solenoid Valve.  You can use these when there are no available DC24 outputs on your EB832 or 1LINK but do have physical 110V outlets available.

HYDROS Float Switch with Magnetic Mount Requires a HYDROS System to operate The HYDROS Magnetic Float Switch Sensor is a simple yet effective water level sensor that can be added to any HYDROS Control with an available Sense Port. This Float Sensor can...

Double junction probes place a second vessel inside the main electrolyte with a second internal junction. The means that even when the aquarium water eventually begins to make its way in the first compartment, it still has to go through the second...

The HYDROS Flow Sensors are easy-to-install and measure the flow rate of water passing through it using the HYDROS app. Available in four sizes: 3/4in (40-800gph), 1in (50-1500gph), 1.5in (100-2500gph), 2in (9200-4050gph) The HYDROS Flow...

The IceCap Gyre is back and better than ever! The all-new IceCap 4K Gyre Flow Pump is more powerful than its 3K predecessor.  Gyre 4K Pump Features & Benefits Unique Gyre Flow: Virtually Eliminates Dead Spots Evenly Distributed Linear...

We have been on the hunt for a reliable heating element that solves a lot of the issues we currently have with other heaters in the hobby. We have always had issues with heaters that have built-in controllers and segregating the controller out from the...

Requires a HYDROS System to operate The HYDROS Slim Temperature Sensor Probe is only 1.6” long and 0.32” wide. It’s all-black solid waterproof IP68 construction is built for years of reliable service. It is a “set...

The PMUP is a multi-purpose pump that can be used for many different tasks on your aquarium.  This listing includes a Power Supply. Automatic Top-Off (ATO) Carbon reactors GFO reactors Biopellet reactors Many other salt or freshwater...

The Turbelle® High Jet is a replacement dosing pump with safety extra low voltage 12 V DC for Osmolator® nano 3152 and Osmolator® 3155 and belongs to a new generation of centrifugal pumps with a high delivery height and small...

The HYDROS WiFi Smart Plug is a smart power outlet designed to work with the CoralVue HYDROS platform. The Smart Plug has a 1 x 100-250V AC outlet that is WiFi controllable using the free HYDROS app for Android and iOS/Apple mobile devices. You can...

The perfect solution to help organize and control the rat's nest of wires that most aquariums suffer from.  This board was created to easily allow you to mount an apex, power strips, equipment controllers and much more so they are easily accessed an...

Compatible Reagents for Automated Testing Systems Reagent solutions for the analysis of alkalinity, calcium, and magnesium levels. It can be used to manually test levels of kH, Ca, and Mg of aquarium water. Available in two, four, and six...

Direct Pump Driver - For TUNZE 0-10V pumps the HYDROS WaveEngine connects directly to the pump head. This removes the clutter of the power brick and the control head for these pumps.

Kit Includes 1x FMM Module, 2x Solid Surface Leak Detection Probe. Aquarium leaks are one of the most feared events for even the most seasoned aquarist – and for good reason. When it comes to leaks, it’s not just about whether you’ll...

1200 Watts in Total w/Inkbird Controller - We recommend lower wattage dual elements with a heater controller for extra redundancy. We have been on the hunt for a reliable heating element that solves a lot of the issues we currently have with other...

Tube Holder - Sea Side Aquatics

The HYDROS Flow Sensors are easy-to-install and measure the flow rate of water passing through it using the HYDROS app. Available in four sizes: 3/4in (40-800gph), 1in (50-1500gph), 1.5in (100-2500gph), 2in (9200-4050gph) The HYDROS Flow...

The Fluid Monitoring Kit Includes: 1x - FMM Fluid Monitoring Module 1x - 1" Flow Sensor (FS-100) 2x - 1/2" Flow Sensor (FS-50) 2x - 1" Unions 4x - 1/2" Adapters FMK What's In The Box? The FMM (Fluid Monitoring Module) is a multi-purpose...

The Energy Bars available for our Apex systems are much more than a glorified power strip. In fact, this component of your aquarium controller equipment is far more important than most people realize – and not all systems are created equal! It...

Every day it seems there is yet another LED light fixture released. Each one with its own method for control and dimming. With this module, you can outfit your Apex System with the ability to control many different brands of LED lights…from...

308-WIFI： [WIFI & APP] WIFI smart controller supports both IOS & Android WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.  [Dual Relay Output] Dual relay...

Usually used with aquarium accessories like RODI inputs, calcium reactor feed lines etc., this flow sensor can be placed in line with the flow on 1/4″ tubing, connected to the FMM, and communicate to your Apex the flow rate of water...

A concentrated reagent specifically for the Alkatronic Alkalinity Controller. For every 1 part reagent, mix 4 parts RO/DI water. Every 1000mL of concentrate will produce 5000mL Total of solution. Store locked up Keep away from children. Not for human...

Usually used with aquarium accessories like reactors, carbon/GFO filters, etc., this flow sensor can be placed in line with the flow on any pipe, connected to the FMM, and communicate to your Apex the flow rate of water through that pipe. The flow sensor...

Replacement reference standard for Trident calibration. Also included in every 2 month supply reagent kit

Use this cable to connect Apex Systems and modules together. The Apex is a modular system that allows you to connect many modules together in either a “daisy-chain” or star topology method. Use this cable to connect together the Apex,...

Skimmer Security Made Simple Smart Skimmer Security by AutoAqua uses the uniquely-designed contactless optical sensor to prevent the protein skimmer from overflows. No moving parts to service or fail. Magnetically coupled sensor makes it super...

Say “Au Revoir” to your old reservoir. The Hydrofill Ti Reservoir is the next generation auto top off gadget that simplifies tasks involved for evaporated makeup water. The smart design offers 15 gallons of storage capacity and a mere (12...

Peace at Mind Made Simple Featuring a Plug and Play design, Smart Level Security automatically detects the water level status when mounted. Magnetically-coupled sensor makes it easy to adjust to the desired level to secure your aquarium...

This attractive fluid containment system stores your dosing fluids in style and even tells you when it’s time to refill! Each side stores two liters (2L) of fluid Connects directly to your DŌS Optical sensors inform your APEX when...

Generic Digital Thermometer with Probe, displays in both F and C.

1LINK™ – Easy, one-click installation The WAV is the first of a line of aquarium products from Neptune Systems that will use a completely new interface. While many in the aquarium world continue to embrace wireless technologies for...

10 pack of installation clips for the HYDROS Rope Leak Detector Easily and securely mount the flexible HYDROS Rope Leak Detection Sensor to most surfaces to better sense the presence of moisture anywhere along the rope. 

This 14 foot long HYDROS System Command Bus Cable allows HYDROS devices to communicate and even provide power to the Control 2 and Control 4.